| C0841 |
- Unable to assign a characteristic to text symbol & |
| C0842 |
- Unable to find characteristic &2 assigned to text symbol &1 |
| C0843 |
- More than one message category is allocated to the data request |
| C0844 |
- ==> Data request type is changed from "simple" to "repeated" |
| C0845 |
- Repeated data request: Define at least one input value |
| C0846 |
- Assign a variable to parameter & |
| C0847 |
- Assign a value to the required parameter & |
| C0848 |
- You cannot use characteristic &1 for process instructions of type &2 |
| C0849 |
- ==> All connected characteristics are ignored |
| C085 |
Data input for corporate values already blocked |
| C0850 |
- No characteristics assigned to characteristics group & |
| C0851 |
- No description for characteristic &1 in language &2 |
| C0852 |
- Unable to assign characteristic &. Characteristic is ignored. |
| C0853 |
- Function name missing -> Unable to assign parameter & |
| C0854 |
- You cannot use characteristic & here. Characteristic is ignored. |
| C0855 |
- Internal error: Unknown data type allocated to parameter & |
| C0856 |
- Error occurred when converting formula: unable to split formula |
| C0857 |
- Enter a message category. Otherwise, characteristics will be lost |
| C0858 |
- Characteristic & is not created/released. Characteristic is ignored. |
| C0859 |
- You cannot use characteristic &1 as a text symbol |
| C086 |
Data input for local values already blocked |
| C0860 |
- A long text has been assigned to char. &. Long texts are not supported |
| C0861 |
- Unable to find message characteristics for message category & |
| C0862 |
- Required message characteristic & has no value or initial value |
| C0863 |
- ==> An input field is generated when the PI sheet is maintained |
| C0864 |
- Characteristic & has no value or initial value |
| C0865 |
- Unable to check characteristic values |
| C0866 |
- No errors found when checking characteristic value assignment |
| C0867 |
- Allocate a function module to the process instruction |
| C0868 |
- Unable to calculate characteristic & as it is not numeric |
| C0869 |
- ==> Unable to continue processing. Correct the error |
| C087 |
Data input not yet started for CoID & |
| C0870 |
Reading characteristic data from classification system... |
| C0871 |
Checking process instruction &1 (type &2)... |
| C0872 |
Creating and checking characteristic structure... |
| C0873 |
Checking characteristic value assignment... |
| C0874 |
Checking text symbols... |
| C0875 |
Checking formula(s)... |
| C0876 |
The process message with number & was created |
| C088 |
Data input already blocked for company & |
| C0880 |
Characteristic & is locked and cannot be changed |
| C0881 |
You may not be able to "copy" process instruction changes |
| C0882 |
Locked characteristic & was changed in the PI assistant |
| C0883 |
Unable to copy process instruction |
| C0890 |
Characteristics added to char. list because message category was changed |
| C0891 |
Check characteristic values |
| C0892 |
You cannot use fct &1 as a check function as it contains no exceptions |
| C0893 |
Caution: You can only use asyn. signature process at the end of PI sheet |
| C0894 |
Characteristic & is not correct for this process instruction type |
| C090 |
Accumulated amortization is too high |
| C091 |
Retirement value > net book value |
| C092 |
Amortization too high |
| C093 |
Write-up is too high |
| C094 |
Only complete retirement is possible |
| C095 |
Period closed. Change not possible |
| C096 |
No change in investment entered |
| C097 |
Company & already entered |
| C099 |
& |
| C100 |
* |
| C1001 |
Format data taken from ABAP dictionary |
| C1002 |
Characteristic & already exists |
| C1003 |
Characteristic & not found or not valid |
| C1004 |
Characteristic group & not found |
| C1005 |
Language key & already entered |
| C1006 |
Enter check report |
| C1007 |
Function module & not found |
| C1008 |
Check table & not found |
| C1009 |
Check routine & not found in check report & |
| C101 |
& |
| C1010 |
No changes were made |
| C1011 |
Select one field only |
| C1012 |
Select a field |
| C1013 |
Interval values already assigned to characteristic |
| C1014 |
Internal unit of measure & not supported |
| C1015 |
Unit of measure & does not exist |
| C1016 |
Maintain format first |
| C1017 |
Value & is not numeric |
| C1018 |
Value & contains more than one decimal point |
| C1019 |
Enter the number of characters |
| C102 |
& |
| C1020 |
No documentation exists |
| C1021 |
Characteristic & saved |
| C1022 |
Characteristic & changed |
| C1023 |
Table & not found |
| C1024 |
Field & not found in table & |
| C1025 |
Enter the name of a value table |
| C1026 |
Characteristic & deleted |
| C1027 |
You cannot enter more than & decimal places here |
| C1028 |
Minimum number of characters for exponent display is & |
| C1029 |
Select a value |
| C103 |
* |
| C1030 |
Characteristic name already exists |
| C1031 |
Characteristic & is being processed by & |
| C1032 |
Internal error calling SAPscript |
| C1033 |
Only one value can be selected as default value |
| C1034 |
Value & entered more than once |
| C1035 |
This indicator cannot be deleted |
| C1036 |
Characteristic & still used |
| C1037 |
Enter a text for this characteristic in language & |
| C1038 |
Select at least one block |