| QA246 |
Check the Customizing table for inspection type & |
| QA247 |
The order & is already being processed |
| QA248 |
Internal error- undefined return code from & |
| QA249 |
You must mark at least one partial lot for the UD selection |
| QA250 |
Enter an inspection lot number or use the selection function |
| QA251 |
Incorrect call for inspection lot maintenance function module |
| QA252 |
Enter a batch number |
| QA253 |
The preparatory steps for the quality inspection could not be completed |
| QA254 |
Maintenance of sample size is only permitted for lots without plan |
| QA255 |
Material &1 &2 is blocked and cannot therefore be processed |
| QA256 |
No material was processed |
| QA257 |
You cannot create an inspection lot |
| QA258 |
Material document for lot was not found- quantity correction not possible |
| QA259 |
Quantity correction for origin &1 is not supported |
| QA260 |
Order type &1 of the QM order does not correspond to plant specifications |
| QA261 |
You must specify a business area |
| QA262 |
The QM order does not contain any costs |
| QA263 |
Cost display- report group does not exist |
| QA264 |
Costs were determined- see cost overview |
| QA265 |
You are not authorized to display the costs |
| QA266 |
No QM order is assigned to inspection lot &1 |
| QA267 |
You cannot correct the actual quantity, since a serial number is required |
| QA268 |
You cannot correct actual quantities for insp. lots of origin &1 |
| QA269 |
The inspection results were already transferred to the classification |
| QA270 |
Batches to be classified are not available for the inspection lot |
| QA271 |
No partial lots are available for the inspection lot |
| QA272 |
The batches assigned to the inspection lot were classified |
| QA273 |
Batches cannot be classified with this inspection lot |
| QA274 |
Inspection stock available for material &1 &2 |
| QA275 |
Sample size could not be calculated |
| QA276 |
Task list could not be found although it was defined for this inspection |
| QA277 |
There is no specification for this material |
| QA278 |
No inspection plan could be found |
| QA279 |
There is no specification for this material |
| QA280 |
No valid inspection type for material &2 was found or selected |
| QA281 |
There is no QINF record for material & and vendor & |
| QA282 |
Manual lots cannot be used for origin & |
| QA283 |
Set 'Preferred inspection type' indicator for either insp. type &1 or &2 |
| QA284 |
No inspection results were entered for partial lot &1 |
| QA285 |
Insp. point field combination &1 does not exist |
| QA286 |
Unit of measure &1 cannot be converted to material base unit of measure |
| QA287 |
Sample processing during inspections for delivery is not allowed |
| QA288 |
No relevant objects exist in the object list for the order |
| QA289 |
Act. qty. corrections not possible, due to stock transfer to other plant |
| QA290 |
Error in inspection lot management (QPL1_CHECK_LOT_COLLECTION) |
| QA291 |
No inspection setup data exists for material &1 in plant &2 |
| QA292 |
The insp. lot for the sample requires insp. point type for phys. samples |
| QA293 |
No default values are maintained for inspection type & in Customizing |
| QA294 |
Defective QMAT record (&1 &2) transferred to update |
| QA295 |
The inspection lot &1 is locked and could not be updated |
| QA296 |
Order changes are not copied to the inspection lot |
| QA297 |
There should be entries for these three fields |
| QA298 |
You cannot correct actual qty, since insp. lot created by reversal doc. |
| QA299 |
Inspection type is activated and insp. lots are created for insp. type & |
| QA300 |
Inspection type &1 (goods issue) is already active |
| QA301 |
Inspection type &1 (delivery) is already active |
| QA302 |
At least one additional inspection type was not activated |
| QA303 |
Actual qty correction is not poss., because the insp. lot has no mat. doc |
| QA304 |
No data is available, since 'Insp. lot w/o task list and chars' was set |
| QA305 |
The 'Active' indicator is canceled for inspection type & |
| QA306 |
The indicator 'Preferred inspection type' is canceled for insp. type &1 |
| QA307 |
The 'Active' indicator is canceled for inspection type &1 |
| QA308 |
You can longer confirm for the order & |
| QA309 |
Goods receipt blocked for this purchasing document item by QM |
| QA310 |
Customer enhancement QAAT0002 has been incorrectly implemented |
| QA311 |
Could not read the text for the inspection type |
| QA312 |
A category &1 inspected certificate is required |
| QA313 |
A category &1 inspected cert. is also required for follow-up deliveries |
| QA314 |
& materials cannot be processed because of missing authorizations |
| QA315 |
Transfer posting not possible since the stock is managed using HUs |
| QA316 |
Actual quantity correction not allowed for handling units |
| QA317 |
Inspection lot cannot be created |
| QA318 |
Inspection plan & does not exist |
| QA319 |
Specify whether a certificate of type &1 is included |
| QA320 |
No inspection lot assigned |
| QA321 |
Number of containers in inspection lot must not be larger than 999,999 |
| QA322 |
No inspection points have been created for the physical samples |
| QA323 |
Inspection point field combination for inspection plan &1 or &2 incorrect |
| QA324 |
BAdI &1 has been implemented more than once |
| QA330 |
Follow-up action & cannot be used |
| QA331 |
Follow-up action &1 not allowed for usage &2 |
| QA450 |
>>>> New messages for Q-costs > 4.0A <<<< |
| QA451 |
QM order &1 will be created when you save |
| QA452 |
No QM order was created |
| QA453 |
Functional area &1 was derived from order type &2 |
| QA495 |
Change the inspection stock of material & in QM only |
| QA496 |
Material &1 &2 is not inspection-relevant for inspection type &3 |
| QA497 |
You cannot transfer stock of material &1 to plant &2 |
| QA498 |
Enter the sample size manually |
| QA499 |
No inspection type is available or selected for origin & |
| QA500 |
The indicator 'Post to inspection stock' is not set for inspection type & |
| QA501 |
No quality score procedure is planned for inspection type &1 |
| QA514 |
The inspection lot &1 has been cancelled |
| QA515 |
You cannot cancel inspection lot &1 |
| QA520 |
Inspection type &1 is not maintained |
| QA600 |
HU inspection lot & exists with batch &. Batch cannot be changed |
| QA800 |
Status conversion in client & was successfully completed |
| QA801 |
Application: QM Client: & |
| QA802 |
Database modification for status conversion was not fully completed |
| QA803 |
Existing status information from QM will be deleted |