| AJ526 |
Cannot reset document number &1 due to re-billing &2 |
| AJ527 |
RTP interface &2 does not supply operand &1 |
| AJ528 |
Schema &1 contains steps for rate &2 in another sequence |
| AJ529 |
Fields will be hidden for the gross price |
| AJ530 |
Schema steps compared to sequence of rate &1 steps |
| AJ531 |
You cannot maintain all fields for dynamic period control |
| AJ532 |
Error &3 in &4 when accessing RTP component &1 period &2 |
| AJ533 |
Error &3 in &4 when accessing RTP component &1 event parameter &2 |
| AJ534 |
RTP component &1: Event parameter &2, event &3, access error &4 |
| AJ535 |
Incorrect call of adjustment reversal f. cust. change in doc. no. &1 |
| AJ536 |
Incorrect call of adjustment reversal for document number &1 |
| AJ537 |
Incorrect call of adjustment reversal for contract change for doc. no. &1 |
| AJ538 |
Select an output parameter for unit of measure &1 |
| AJ539 |
No further adjustment reversal possible for billing document &1 |
| AJ540 |
Error in user exit "EXIT_SAPLEABW_001" |
| AJ541 |
Cannot carry out meter reading unit replacement |
| AJ542 |
Cannot carry out meter reading unit replacement |
| AJ543 |
Doc. no. &1: Cannot cancel adjustment reversal |
| AJ544 |
Doc. no. &1: Adj. rev. (cust./cont. change) only poss. for zero bill |
| AJ545 |
Doc. no. &1: Error cancelling adjustment reversal |
| AJ546 |
Cancel doc. no. &1: Cannot cancel adjustment revers. (cust./cont. change) |
| AJ547 |
Doc. no. &1: Orig. doc. number for cancelling adjust. reversal missing |
| AJ548 |
Print. doc. &2 for billing doc. &1 has already been cancelled for billing |
| AJ549 |
Billing document &1 has not been invoiced correctly |
| AJ550 |
Document &1 has not been cancelled |
| AJ551 |
Doc. number &1: Cannot cancel adjustment reversal |
| AJ552 |
Contract &1 (doc. no. &2) does not fit contract &3 (doc. no. &4) |
| AJ553 |
Document &1: Print document &2 is more recent than print document &3 |
| AJ554 |
Specify a weighting key |
| AJ555 |
You cannot use a weighting key with the "Last value" procedure |
| AJ556 |
Doc. no. &1 (contract &2) has separate period-end billing |
| AJ557 |
Internal error: price is inconsistent |
| AJ558 |
Unknown value &1, domain &2, program &3, routine &4 |
| AJ559 |
Invalid value &1: ID &2, user exit &3, function &4 |
| AJ560 |
Invalid value &1: ID &2, routine &3, include &4 |
| AJ561 |
Document number &1 of contract &2: error during simulation run |
| AJ562 |
Contract &1: Error during re-billing (contract/customer change) |
| AJ563 |
Document no. &1: Adjustment reversal can only be partially canceled |
| AJ564 |
Install. &1, billing date &2: Bill. doc. &3, line item &4 inconsistent |
| AJ565 |
Unit of measurement &1, time &2-&3: Error in usage factor |
| AJ566 |
Doc. no. &1, installation &2, period &3-&4: Error cancelling usage factor |
| AJ567 |
Operand period &1-&2 is not within billing period &3-&4 |
| AJ568 |
Cannot determine usage factor for bill &1, operand &2 due to schema step |
| AJ569 |
Cannot determine usage factor (operand &1/&2 equals unit of measure &3) |
| AJ570 |
Conversion error: Date &1, time &2, time zone &3 to time zone &4 |
| AJ571 |
Schema step &1: Table layout &2 not possible for period-end billing |
| AJ572 |
Period-end billing rate &1 cannot be used |
| AJ573 |
Backbilling is not allowed in schema &1 |
| AJ574 |
Billing in advance control &1 is not valid |
| AJ575 |
Period control &1 is not allowed with dynamic period control |
| AJ576 |
Backbilling group &1 in step &2 is inconsistent |
| AJ577 |
Formula &1, paramater &2, time &3-&4: Cannot determine calculation mode |
| AJ578 |
Maintain the time slice generator in step &1 |
| AJ579 |
The gross price and net price have different zones in price group &4 |
| AJ580 |
Update type &1 not allowed with dynamic period control |
| AJ581 |
Gross group &1 is inconsistent |
| AJ582 |
Gross group &1 is not compatible with period control |
| AJ583 |
Gross group &1 is only used once |
| AJ584 |
The gross line field is not consistent in gross group &1 |
| AJ585 |
Step &1 has no gross group, but the gross line field is selected |
| AJ586 |
Step &1: Gross line and posting-relevant fields selected |
| AJ587 |
Step &1: Gross group not allowed with price grouping |
| AJ588 |
Gross group &1 is used for multiple rates |
| AJ589 |
No calculation mode for formula &1, parameter &2, event &3 |
| AJ590 |
Net lines for the gross price are missing in gross group &4 |
| AJ591 |
Net lines for the gross price are missing in gross group &4 |
| AJ592 |
Net lines for the gross price are missing in gross group &4 |
| AJ593 |
Step &1: Variant category &2 is not valid |
| AJ594 |
Billing document &1 contains an error in gross group &4 |
| AJ595 |
Internal: Differentiator missing in gross group &1 |
| AJ596 |
Internal: Gross group &2 has no gross price in billing document &1 |
| AJ597 |
Internal: Error reading weighting key &1 (&2 &3) |
| AJ598 |
The temperature area in installation &2 is missing for weighting key &1 |
| AJ599 |
Installation &1, date &2: Temp. area missing for degree day weight. &3 |
| AJ600 |
Period category not filled in table IZWST |
| AJ601 |
Inconsistency in MR document &1, connector &2, log. register &3, date &4 |
| AJ602 |
Internal error: CSNO &1 not found in table &2 |
| AJ603 |
Meter reading reason is not relevant for billing |
| AJ604 |
No proration due to incorrect schema setup for dynamic period control |
| AJ605 |
Error during dynamic billing reversal |
| AJ606 |
Installation &1 not valid on key date &2 |
| AJ607 |
Do not process positive/negative time-dependent quantities simultaneously |
| AJ608 |
The document will be released in the background |
| AJ609 |
An error occurred - invoice account &1 again |
| AJ610 |
Error during release of document &1 - restart the process |
| AJ611 |
No documents available for release in the background |
| AJ612 |
Gas procedure &1 is not valid |
| AJ613 |
Gas procedure &1 is not valid |
| AJ614 |
A transport request for discount &1 was generated |
| AJ615 |
Gross group &1 does not exist in schema &2 for rate &3 |
| AJ616 |
Error in user exit EXIT_SAPLEA01_006 |
| AJ617 |
DEMAND18 cannot process register operands with multiple registers |
| AJ618 |
Gas date must lie between the previous and the subsequent meter reading |
| AJ619 |
Document and contract have different currencies; conversion not possible |
| AJ620 |
You are not authorized to create object &1 in division &2, class &3 |
| AJ621 |
You are not authorized to change object &1 in division &2, class &3 |
| AJ622 |
You are not authorized to display object &1 in division &2, class &3 |
| AJ623 |
The time slices of operand &1 are not identical |
| AJ624 |
No periods to be set up exist in schema &2 for category &1 |
| AJ625 |
An actual meter reading result must be followed by recalculation |