| QMIP_EA401 |
Value assgmt type &1: Only the first Q-relevant val. assgmt is considered |
| QMIP_EA402 |
There is more than one property for value assignment type &1 |
| QMIP_EA403 |
No values could be selected for the F4 help |
| QN8D001 |
Mandatory cause assignment is missing for task &1 of item &2 |
| QN8D002 |
Task &1 of item &2 refers to the non existing cause &3 |
| QP049 |
Sytem error during processing of long text &1 |
| QP050 |
Long text for inspection plan & could not be copied |
| QP051 |
Inspection plan & is already being processed by & |
| QP052 |
There is no task list matching the selection criteria |
| QP053 |
The first selected inspection plan has already been reached |
| QP054 |
The inspection plan identifier exists already. Enter another. |
| QP055 |
Inspection plans exist in the past or in the future |
| QP056 |
Inspection plan & has been deleted |
| QP057 |
Inspection plan is not released for inspection |
| QP058 |
Inspection plan is not released for costing |
| QP059 |
You are not authorized to delete this inspection plan |
| QP061 |
Inspection plan $ / $ / $ was deleted |
| QP062 |
Inspection plan with plan group & is saved |
| QP063 |
Inspection plan with plan group & for material & is saved |
| QP064 |
Select an inspection plan |
| QP065 |
List does not contain inspection plans |
| QP066 |
The last selected inspection plan has already been reached |
| QP067 |
Key date is overwritten with date & from change number |
| QP068 |
Inspection plan $ $ is not valid for date $ |
| QP069 |
Inspection plan $ $ is not generally valid from & through & |
| QP070 |
Inspection plan & & in lot size interval is not generally valid |
| QP071 |
No group counter was selected |
| QP072 |
No use exists for the selection criteria you entered |
| QP073 |
& inspection plans (headers) were read |
| QP079 |
* Starting 080: checks for an oper: starting 090: like 080 w/addl ident. |
| QP080 |
Referenced characteristic & is not defined in operation |
| QP081 |
Referenced characteristic & is not variable (quantitative) |
| QP082 |
No measured values are recorded for referenced characteristic & |
| QP083 |
Referenced characteristic & is a calculated characteristic |
| QP084 |
No test equipment assigned |
| QP085 |
No confirmation required for referenced characteristic & |
| QP086 |
No original value recording for referenced characteristic & |
| QP087 |
Cond.charac.: There is no preceding required characteristic in operation |
| QP088 |
No original value recording for calculated characteristic & |
| QP089 |
No partial samples exist for referenced characteristic & |
| QP090 |
Formula &: referenced characteristic & is not defined in operation |
| QP091 |
Formula &: referenced characteristic & is not variable (quantitative) |
| QP092 |
Formula &: no measured values are recorded for ref.charac. & |
| QP093 |
Formula &: referenced characteristic & is a calculated characteristic |
| QP095 |
Formula &: no confirmation required for referenced characteristic & |
| QP096 |
Formula &: no original value recording for referenced characteristic & |
| QP097 |
Cond.char. &: There is no preceding required charac. in the operation |
| QP098 |
Formula &: no original value recording for calculated characteristic |
| QP099 |
Formula &: no partial samples exist for referenced characteristic & |
| QP100 |
Error during key date selection |
| QP101 |
Nominal values cannot be specified for tolerance key |
| QP102 |
There is no unit of measure assigned |
| QP110 |
Error during conversion: & & & |
| QP111 |
Processing with inspection points is required for insp. lots in PM orders |
| QP120 |
Enter * in the field |
| QP123 |
Maintain QM plant settings for plant & |
| QP124 |
* 125-139 and 140-154 operation check (refer to 80 and 90) |
| QP125 |
Calculated characteristic & does not have partial samples |
| QP126 |
Referenced characteristic & has a different sampling procedure |
| QP127 |
Maintain the defect codes |
| QP128 |
No results recorded for ref. characteristic & |
| QP129 |
The calculated characteristic must be a long-term characteristic |
| QP140 |
Formula &: The calculated characteristic has no partial samples |
| QP141 |
Formula &: Sampling procedure differs from characteristic & |
| QP142 |
Char. &: No defect code has been maintained |
| QP143 |
Formula & : No results are recorded for referenced characteristic & |
| QP144 |
Formula & : Calculated characteristic must be a long-term characteristic |
| QP145 |
CH&: External data origin not allowed for calc. char. and classed char. |
| QP146 |
Op. &1, CH &2: Char. ident. &3 used for QDI several times in task list |
| QP147 |
Operation &1, CH &2: External data origin not allowed for insp. points |
| QP148 |
Customizing table TQ73 is not maintained for results data origin & |
| QP150 |
Enter field name |
| QP151 |
Caution: function module name is reset |
| QP152 |
Enter function module |
| QP153 |
Caution: field name is reset |
| QP154 |
Maintain two characters for parameter name |
| QP155 |
Function module name is reset |
| QP156 |
Enter a function module |
| QP157 |
Field name is reset |
| QP158 |
Maintain two characters for parameter name |
| QP159 |
Status does not allow business operation & |
| QP199 |
Material has already been assigned to the inspection plan |
| QP200 |
Enter numbers for unplanned characteristics (QM client presettings) |
| QP201 |
There are no dynamic modification criteria for plan use & |
| QP202 |
Maintain Table TQ03 for module pool & and screen & |
| QP203 |
Number ranges for characteristics cannot be changed |
| QP204 |
Maintain change number & |
| QP205 |
Maintain table TQ25 for entry & & & & |
| QP206 |
Catalog type & is no longer available |
| QP207 |
Char. &: sampling procedure & does not fit dyn.mod.rule & |
| QP208 |
Char. &: sample unit & cannot be used with material & |
| QP209 |
Char. &: dyn. mod. criteria cannot be used with plan usage & |
| QP210 |
Dyn. modification criteria & not defined for plan usage & |
| QP211 |
Char. &: Plan usage has too few dynamic modification criteria |
| QP212 |
Inspection characteristics must be maintained for operation &1 |
| QP213 |
Insp. Characs Exist for Op. &1 Although Indicator in Control Key Missing |
| QP214 |
No valid task list assignment for char. &1, dependent charac. specs &2 |
| QP215 |
Char. &: sampling procedure & cannot be used |
| QP216 |
Ch. & : Conflicts with char. & (operation &) due to batch classification |
| QP217 |
Char. &1: Mstr insp. charac. already used in char. &2 (operation &3) |