| RSM1473 |
Errors on completion of deletion report |
| RSM1474 |
Errors when selectively deleting from IC &1 report &2 |
| RSM1475 |
Selective deletion from IC &1 with report &2 completed successfully |
| RSM1476 |
Reconstruction of InfoCube/DSO &1 with request ID &2 running |
| RSM1477 |
Reconstruction of InfoCube/DSO &1 with request ID &2 finished |
| RSM1478 |
Unidentified error occurred when creating a new session |
| RSM1479 |
Max.number of procesess reached. Unable to generate new dialog processes. |
| RSM1480 |
You are not authorized to create a new dialog process |
| RSM1481 |
Selective deletion from cube & not allowed; request still running |
| RSM1482 |
InfoCube & not available active or is not a basic cube |
| RSM1483 |
Aggregate & could not be locked; no reconstruction for this aggregate |
| RSM1484 |
Error while activating data in DataStore object |
| RSM1485 |
Re-aggregation of aggregate &1 refused, already rolled up to SID &2 |
| RSM1486 |
No data loaded into DSO for update; |
| RSM1487 |
Request &1(&2) deleted from cube &3 |
| RSM1488 |
Deletion of request &1(&2) from cube &3 terminated |
| RSM1489 |
Compression not necessary; no requests found for compressing |
| RSM1490 |
Performing check and potential update for status control table |
| RSM1491 |
&1 changed; from &2 to &3 |
| RSM1492 |
No update required for status control table |
| RSM1493 |
Perform update for status control table for cube & ? |
| RSM1494 |
------------------------------------------------------------------------- |
| RSM1495 |
No InfoCube/DataStore assigned to this DataSource as a data target |
| RSM1496 |
Severity is invalid ! ('9' or ' ' are allowed at present) |
| RSM1497 |
Data target &1 has already got request &2; deletion not permitted |
| RSM1498 |
Request &1 already retrieved by data target &2 |
| RSM1499 |
Delta update in data target &1 must be deact. before deleting the request |
| RSM150 |
Parameter definition & maximum length & shortened to length 128 |
| RSM1500 |
Do you want to deactivate the delta update in data target &1 ? |
| RSM1501 |
Data loading using master data - deletion process locked ! |
| RSM1502 |
Data target &1 has not yet retrieved request &2. No compression allowed |
| RSM1503 |
Request &1 not yet retrieved by the connected data target &2 |
| RSM1504 |
Delta update in data target &1 must be deact. to compress the request |
| RSM1505 |
Data packet &1 from request &2 locked by another transaction &3 |
| RSM1506 |
Status change for user &1 time stamp &2 allowed |
| RSM1507 |
Request &1 from InfoCube &2 set by QM action to &3 by user &4 |
| RSM1508 |
Request &1 set to &2 by QM, user &3 |
| RSM1509 |
Delete request &1 QM status; set to tech. status &2 using user &3 |
| RSM151 |
DataSource '&' not active in source system '&' - Termination |
| RSM1510 |
Request &1 from InfoCube &2 reset to t-status &3 by user &4 |
| RSM1511 |
& running: DataStore object &, from & to & |
| RSM1512 |
& finished: DataStore object &, from & to & |
| RSM1513 |
& successful: DataStore object &, from & to & |
| RSM1514 |
& terminated: DataStore object &, from & to & |
| RSM1515 |
Deletion run for &1 &2 terminated due to int. error when reading &1 &2 |
| RSM1516 |
Request &1(&2) deleted from DataStore object &3 |
| RSM1517 |
Deletion of request &1 from DataStore object &2 successful |
| RSM1518 |
Deletion of M version from DataStore object &2 terminated |
| RSM1519 |
Deletion of request &1(&2) from DataStore object &3 terminated |
| RSM1520 |
Deletion of M version from DataStore object &1 completed successfully |
| RSM1521 |
Displaying content of DataStore object table is not supported |
| RSM1522 |
Start of log for loading data of request &1 into InfoCube &2 |
| RSM1523 |
Cannot update request & in data target |
| RSM1524 |
Request & deleted from PSA; RSREQICODS entry also deleted |
| RSM1525 |
Request & not found in IC &; RSREQICODS also deleted |
| RSM1526 |
ODS object: &1 - Request &2(&3) is not yet activated - No upgrade |
| RSM1527 |
Checking update request &1(&2) in DataStore object &3 |
| RSM1528 |
Change log request &1 does not exist in DataStore object &2 |
| RSM1529 |
The FS request &1(&2) exists by using change-log requests in DSO &3 |
| RSM1530 |
Request &1 has a smaller ID than comp. &2, rollup &3 or datamart &4 |
| RSM1531 |
SID &1 is smaller than / equal to update SID of DTA &2 / &3; canceled |
| RSM1532 |
SID &1 is less than /equal to check SID &2 of data target &3; canceled |
| RSM1533 |
Request is already (partially) activated; no further QM action possible |
| RSM1534 |
DataStore object & is write-optimized; cannot set QM status |
| RSM1535 |
Data target '&' is being activated; no QM action possible |
| RSM1536 |
SID &1 is smaller than / equal to archiving SID &2 of DSO &3; canceled |
| RSM1537 |
InfoProvider '&' does not exist or is not active |
| RSM1538 |
InfoProvider '&' is not a master data or text InfoProvider |
| RSM1539 |
Error occurred while deleting the request information: InfoProvider '&' |
| RSM1540 |
No request found for deletion in InfoProvider '&' |
| RSM1541 |
You are not authorized to execute report & |
| RSM1600 |
*** Additional Scheduler Messages *** |
| RSM1601 |
Request &1 IObj &2 has different IObj aggr. behavior to reqst &3, IObj &4 |
| RSM1602 |
Due to the many selections, a cancellation can occur in the extractor. |
| RSM1603 |
InfoPackages successfully prepared for Unicode |
| RSM1604 |
No existing requests deleted from data targets -> Long text |
| RSM1605 |
Hexadecimal->Character conversion for '&1' not possible in this code page |
| RSM1606 |
Hexadecimal->Character conversion delivers internal errors; Cancel |
| RSM1607 |
For sel. field '&', no selection with SIGN = '&'; OPTION '&' allowed |
| RSM1608 |
Deleting initializations affects DataStore objects |
| RSM1609 |
Init simulation and 'early delta' request together does not make sense |
| RSM1610 |
Mapping of DS &1 from QS &2 changed from IS &3 to IS &4 -> long text |
| RSM1611 |
InfoPackage & is scheduled or is running now; cannot start it again |
| RSM1612 |
InfoPackage & running; InfoPackage cannot be changed |
| RSM1613 |
Cannot switch Cube &1 from 'plan' to 'load' |
| RSM1614 |
Switching Cube &1 from 'plan' to 'load' terminated due to internal errors |
| RSM1615 |
Log: Program &1; Request &2; Status &3; Action &4 |
| RSM1616 |
Delta request & is incorrect in the monitor |
| RSM1617 |
A repeat needs to be requested |
| RSM1618 |
Data target &1 still includes delta request &2 |
| RSM1619 |
If the repeat is now loaded, then after the load |
| RSM1620 |
there could be duplicate data in the data targets |
| RSM1621 |
Request the repeat? |
| RSM1622 |
Request & successfully deleted from the PSA |
| RSM1623 |
Request & has a yellow traffic light in the monitor - Cannot be deleted |
| RSM1624 |
'&' not set for source '&' ; logsys '&' ; OLTP source '&' |
| RSM1625 |
Termination when calling up '&' for destination '&' |
| RSM1626 |
Unrecognized error when requesting data: Row '&' : Error '&' |
| RSM1627 |
Termination in FM '&' with Subrc '&', with no error message |
| RSM1628 |
Request '&1(&2)' has lower ID than data mart '&3'/'&4' |