| AGR_MAP163 |
Component &1 from BDoc structure &2 cannot be processed. Terminated |
| AGR_MAP164 |
Component &1 is not available in structure &2 |
| AGR_MAP165 |
Database action &1 for agreement &2 not permitted |
| AGR_MAP166 |
Field &1 for agreement &2 cannot be converted |
| AGR_MAP167 |
Error while opening the APPLICATION_LOG handle; termination |
| AGR_MAP168 |
DDIC structure &1 cannot be determined |
| AGR_MAP169 |
Delta Update Agreement: Campaign &1, OLTP Agreement &2, CRM Agreement &3 |
| AGR_MAP170 |
Error updating agreement &1, campaign &2 (BDoc &3) |
| AGR_MAP171 |
Header information of BDOC is missing |
| AGR_MAP172 |
Header segment of BDOC is missing |
| AGR_MAP173 |
Incorrect format of Working_Set &1 of BDOC &2 |
| AGR_MAP174 |
BDoc &1 does not have a valid entry for sending to an OLTP system |
| AGR_MAP175 |
Error in upload filter for exchange object &1 |
| AGR_MAP176 |
Conversion of agreement &1 failed |
| AGR_MAP177 |
Error when reading data from BDoc &1 |
| AGR_MAP178 |
Application log could not be loaded |
| AGR_MAP179 |
Loading of application does not send back a log handle |
| AGR_MAP180 |
Application log could not be created |
| AGR_MAP181 |
Search for a valid application log not possible |
| AGR_MAP182 |
No entries in Table &1 for &2 &3 &4 |
| AGR_MAP183 |
Object &1 and &2 have different filters for table &3 |
| AGR_MAP184 |
Object &1 has no filter for tab. &2; but objects with filters exist |
| AGR_MAP185 |
No valid exchange object exists for table &1 |
| AGR_MAP186 |
Exchange object could not be determined |
| AGR_MAP187 |
Instruction ASSIGN COMPONENT &1 OF STRUCTURE &2 TO &3 failed |
| AGR_MAP188 |
Upload required |
| AGR_MAP189 |
Download required |
| AGR_MAP190 |
Upload and download required |
| AGR_MAP191 |
Current filter setting is not supported |
| AGR_MAP192 |
&1: You require at least R/3 Release 4.6C to upload agreements |
| AH001 |
Enter 0 for first block for & |
| AH002 |
Enter 9,999,999,999 for last block for & |
| AH003 |
Gap in blocks for & (adjust blocks) |
| AH004 |
Overlap in blocks for & (adjust blocks) |
| AH005 |
All blocks are consistent |
| AH006 |
Rate category &1 does not exist |
| AH007 |
Operand &1 is still used |
| AH008 |
Dependent entries in table &1 &2 &3 &4 |
| AH009 |
Enter &1 &2 &3 &4 |
| AH010 |
Fact &1 &2 &3 &4 does not exist |
| AH011 |
Rate fact &1 &2 &3 does not exist |
| AH012 |
Temperature value not in positive range |
| AH013 |
Air pressure not between &1 and &2 |
| AH014 |
Enter unit of measurement |
| AH015 |
Quantity issued is zero |
| AH016 |
Units of measurement within calorific value district &1 do not match |
| AH017 |
Units of measurement match for each calorific value district |
| AH018 |
Check cannot be performed (enter an object) |
| AH019 |
To-measured pressure &1 is less than from-measured pressure &2 |
| AH020 |
Volume correction factor is zero |
| AH021 |
From-measured pressure is zero |
| AH022 |
All specified measured blocks are consistent |
| AH023 |
BClss &1 air press. area &2 temp.area &3 valid from &4: block start not 0 |
| AH024 |
BClass &1 air pr.area &2 temp.area &3 val.from &4: block end not 999.9999 |
| AH025 |
Bill. class &1 air pressure area &2 temp. area &3 valid from &4: gap |
| AH026 |
Bill. class &1 air pressure area &2 temp. area &3 valid from &4: overlap |
| AH027 |
Consistency check for meas. pressure blocks - use only for complete list |
| AH028 |
&1 is zero |
| AH029 |
&1 is not between &2 and &3 |
| AH030 |
Measured pressure &1 is greater than maximum value &2 |
| AH031 |
Choose a default value for billing class &1 |
| AH032 |
Several default values chosen for billing class &1 |
| AH033 |
There is exactly one default value per billing class |
| AH034 |
Gas law deviation factor &1 is not between &2 and &3 |
| AH035 |
Gas temperature &1 is rounded to exactly 0.5 |
| AH036 |
Billing class &1: block start is not 0 |
| AH037 |
Billing class &1: block end is not &2 |
| AH038 |
Gap in billing class &1 |
| AH039 |
Overlap in billing class &1 |
| AH040 |
Specify a pressure level |
| AH041 |
Only values &1 &2 &3 &4 permitted |
| AH042 |
Deviation &1 is greater than &2 |
| AH043 |
Default &1 is greater than permitted deviation &2 |
| AH044 |
Enter the date |
| AH045 |
Valid for all billing procedures, if no specific value |
| AH046 |
Billing transaction &1 not permitted |
| AH047 |
No text was entered |
| AH048 |
Measured pressure &1 not in table &2 |
| AH049 |
Gas procedure &1 is still used (see where-used list) |
| AH050 |
Only 01, 02 or 03 permitted as gas billing types |
| AH051 |
Enter a valid volume correction factor procedure |
| AH052 |
Enter a to-date that is after the last entry |
| AH053 |
Enter a valid calorific value procedure |
| AH054 |
Enter a to-date that is after the from-date |
| AH055 |
Calorific value procedure &1 is still used (see where-used list) |
| AH056 |
Enter rate type, rate category and rate |
| AH057 |
Error occurred during transfer of facts for installation &1 |
| AH058 |
Rate &1 does not contain any rate steps |
| AH059 |
Not possible to transfer facts for operand category &v1& |
| AH060 |
Not permissible to set the "No prorat." indicator |
| AH061 |
Select weighting/cal. value district only if you choose averaging type 02 |
| AH062 |
Division &1: division category from table &2 cannot be determined |
| AH063 |
Enter a billing class |
| AH064 |
Div. cat. &1 of div. &2 does not match div. cat. &3 of price class &4 |
| AH065 |
Enter a valid combination of control indicators |
| AH066 |
Calorific value procedure &1 not in table &2 |
| AH067 |
Position cursor on the line you wish to delete |
| AH068 |
Volume correction factor procedure &1 not in table &2 |
| AH069 |
Price unit of measurement &1 and billing unit of meas. &2 do not match |
| AH070 |
Volume correction factor procedure &1 is still used (see where-used list) |