| UPB_CW083 |
Layout &1 does not exist |
| UPB_CW084 |
Parameter group &1 does not exist |
| UPB_CW085 |
Layout contains identical rows or columns |
| UPB_CW086 |
Internal error: Layout generation not possible |
| UPB_CW087 |
Enter a description |
| UPB_CW088 |
Interface contains neither planning folder nor Web interface |
| UPB_CW089 |
Web interface &1 is not available |
| UPB_CW090 |
Lead column does not contain any characteristics |
| UPB_CW091 |
Characteristic &1 is missing in layout definition |
| UPB_CW092 |
Layout is too complex or characteristic allocation is incorrect |
| UPB_CW093 |
Key figures must be in data columns or in complex lead columns |
| UPB_CW094 |
Incorrect usage of dynamic rows or columns |
| UPB_CW095 |
Incorrect column or row definition for characteristic &1 |
| UPB_CW096 |
Missing row or column label |
| UPB_CW097 |
Key figure &1 is not available in the level |
| UPB_CW098 |
Characteristic &1 cannot be used statically |
| UPB_CW099 |
Incorrect variable usage: &1 &2 |
| UPB_CW100 |
ID &1 does not correspond to the naming convention |
| UPB_CW101 |
You are not authorized to perform this action |
| UPB_CW102 |
Requested object is locked |
| UPB_CW501 |
Data was saved |
| UPB_CW502 |
InfoObject &1 does not exist |
| UPB_CW503 |
Only one key figure is activated in the data model |
| UPB_CW504 |
At least one key figure is required |
| UPB_CW505 |
Currency/unit-bearing characteristic &2 is missing for &1 |
| UPB_CW506 |
Chara. &1 is compounded to chara. &2. However, chara. &2 is missing |
| UPB_CW507 |
First assign an InfoObject to all dimensions |
| UPB_CW508 |
Assign at least one InfoCube to the InfoObject |
| UPB_CW509 |
Assign every InfoCube to a planning area |
| UPB_CW510 |
SAP BW is not available in this system. Choose an RFC destination |
| UPB_CW511 |
Assign all variables |
| UPB_CW512 |
Assign all master data |
| UPB_CW513 |
Subapplication can not yet or no longer be changed |
| UPB_CW514 |
Either the application or subapplication do not exit |
| UPB_CW515 |
Key figure &1 is not allowed here |
| UPB_CW516 |
Key figure &1 cannot occur several times |
| UPB_EXIT001 |
Characteristic &2 (&1) is not contained in the chars to be checked |
| UPB_EXIT002 |
Period &1 of 7-digit period &2 is unequal to &3 |
| UPB_EXIT003 |
Fiscal year &1 of 7-digit period &2 is unequal to &3 |
| UPB_EXIT004 |
Error in Customizing of characteristic relationships (See long text) |
| UPB_EXIT005 |
Characteristic &1 maintained in char. relationships is not supported |
| UPB_EXIT006 |
Error in Customizing of characteristic relationships (See long text) |
| UPB_MAPPING100 |
Table of sender records does not come from planning area &1 |
| UPB_MAPPING101 |
Error in processing. Analyze log (->long text) |
| UPB_MAPPING102 |
Table of receiver record is not suitable for & |
| UPB_MAPPING103 |
DDIC structure of sender structure &1 is not suitable for plng area &2 |
| UPB_MAPPING104 |
Sender structure &1 is not completely maintained. Check |
| UPB_MAPPING105 |
&1 &2 is not supported |
| UPB_PL000 |
RAISE & & & & (internal error) |
| UPB_PL001 |
There is no input layout |
| UPB_PL002 |
Layout is not displayed |
| UPB_PL003 |
Source currency &1 does not match your settings |
| UPB_PL004 |
Target currency &1 does not match your settings |
| UPB_PL005 |
Exchange rate type &1 does not match your settings |
| UPB_PL006 |
Exchange rate type &1 is not available. Select another exchange rate type |
| UPB_PL007 |
No authorization for exchange rate maintenance |
| UPB_PL008 |
There are no exchange rates, which correspond to your selection |
| UPB_PL009 |
The function 'highlight changes' is not available |
| UPC000 |
********** General messages *************************************** |
| UPC001 |
You may not have more than 3 field selection boxes together |
| UPC002 |
Select line |
| UPC003 |
Value &1 is not permitted for characteristic &2 |
| UPC004 |
Upper limit must be higher than lower limit |
| UPC005 |
Characteristic &1 does not exist in planning area &2 |
| UPC006 |
No input help is available for characteristic &1 |
| UPC007 |
Objects whose name begins with a number are in the SAP name range |
| UPC008 |
The name of the object may only contain letters and figures |
| UPC009 |
Data saved |
| UPC010 |
Data was deleted |
| UPC011 |
The name of the object may not begin with the number 0 |
| UPC012 |
The values were adapted |
| UPC013 |
The conditions were adapted |
| UPC014 |
Check the formula for errors |
| UPC015 |
Term &1 was not found in search area |
| UPC016 |
Select valid field |
| UPC017 |
Not all fields are displayed |
| UPC018 |
Entry is too long |
| UPC019 |
First enter values |
| UPC020 |
You may not enter an initial value here |
| UPC021 |
No statistics available |
| UPC022 |
Place the cursor in a field for the from value |
| UPC023 |
Position cursor on a line |
| UPC024 |
Attribute &1 on characteristic &2 is not available |
| UPC025 |
No input help is available for attribute &1 |
| UPC026 |
Value &1 is not available for attribute &2 |
| UPC027 |
Planning function will be undone |
| UPC028 |
There is no characteristic relationship with the number &1 |
| UPC029 |
Area &1 is not a basic planning area |
| UPC030 |
Multi-planning area &1 does not contain basic planning area &2 |
| UPC031 |
Basic planning area &1 does not correspond to transferred basic area &2 |
| UPC055 |
Make an entry in all required fields |
| UPC056 |
Make an entry in field &1 |
| UPC057 |
Enter a variable in field &1 |
| UPC090 |
Data requested in planning area &1 is locked by user &2 |
| UPC091 |
Capacity overload of lock server for planning area &1, see long text |
| UPC092 |
Requested data cannot be locked. See long text |
| UPC098 |
Generated report could not be inserted -> see long text |
| UPC099 |
Program is inconsistent -> see long text |
| UPC200 |
***************** Basic data ******************************************** |
| UPC201 |
InfoCube &1 does not exist |