| RSD_TREX228 |
Error activating/deactivating DF cache |
| RSD_TREX229 |
BIA-Index of InfoCube '&1' set to status '&2' |
| RSD_TREX230 |
BIA index set to status "active" |
| RSD_TREX231 |
DF index deactivated |
| RSD_TREX232 |
'&1' duplicate records in index of table '&2' (no error) |
| RSD_TREX233 |
All '&1' records from DB table '&2' are in index in BIA |
| RSD_TREX234 |
'&1' records missing from index in DB table '&2'; index must be rebuilt |
| RSD_TREX235 |
Random query '&1' (SUBRC = '&2') with differing results |
| RSD_TREX236 |
Check for consistency using random queries |
| RSD_TREX237 |
Results of random queries on DB and BIA are identical |
| RSD_TREX238 |
Error while executing query (SUBRC '&1', successful '&2', read from '&3') |
| RSD_TREX239 |
Error while comparing results (SUBRC '&1') |
| RSD_TREX240 |
Test values: InfoCube '&1', queries '&2', start value '&3' |
| RSD_TREX241 |
Edit index for table '&1' |
| RSD_TREX242 |
Runtime in seconds: database: '&1', BIA: '&2' |
| RSD_TREX243 |
Structural change to InfoCube makes restructuring of BIA index necessary |
| RSD_TREX244 |
BIA does not support the characters '*' and '?' in characteristic &1 |
| RSD_TREX246 |
Key figure '&1' triggers an overflow |
| RSD_TREX300 |
<<<< New for Change Run >>>>>>>>>>>>>>>>>>>>< |
| RSD_TREX301 |
Error occurred during indexing in BIA; change run continuing |
| RSD_TREX350 |
<<<<<<<<<<< BIA Backup&Recovery >>>>>>>>>>>>>>>>< |
| RSD_TREX351 |
Snapshot with ID '&1' exported in '&2' seconds |
| RSD_TREX352 |
Error while exporting snapshot with ID '&1' |
| RSD_TREX353 |
BIA index for InfoCube '&1' updated |
| RSD_TREX354 |
Error while updating BIA index for InfoCube '&1' |
| RSD_TREX355 |
Snapshot with ID '&1' imported in '&2' seconds |
| RSD_TREX356 |
Error while importing snapshot ID '&1' |
| RSD_TREX357 |
BIA data updated and regenerated |
| RSD_TREX358 |
Update of BIA data terminated with errors |
| RSD_TREX359 |
Update of BIA index for InfoCube '&1' |
| RSD_TREX360 |
Snapshot with ID '&1' does not exist |
| RSD_TREX361 |
EXPORT was successful |
| RSD_TREX362 |
Snapshot ID '&1' deleted in '&2' seconds |
| RSD_TREX363 |
Error while deleting snapshot ID '&1' |
| RSD_TREX364 |
Snapshot with ID '&1' does not exist |
| RSD_TREX365 |
BIA data recovery is in progress |
| RSD_TREX366 |
BIA index server is not available again after wait time |
| RSD_TREX367 |
Recovery mode '&1'; reason: '&2' |
| RSD_TREX368 |
Maximum request ID in package dimension index '&1' |
| RSD_TREX369 |
Snapshot &1 is locked against deletion on the BIA |
| RSD_TREX400 |
&1 for &2 &3 is not active |
| RSD_TREX401 |
No authorization for this action |
| RSD_TREX402 |
Internal ABAP error |
| RSD_TREX403 |
Error during generation of BW information |
| RSD_TREX404 |
BIA returned an error |
| RSD_TREX405 |
BIA returned an error for index &1 |
| RSD_TREX406 |
BIA returned too much data when retrieving the reference data |
| RSD_TREX407 |
BIA returned no data when fetching the reference data |
| RSD_TREX408 |
Restriction to approximately '&1' percent of data |
| RSD_TREX409 |
Error while reading data |
| RSD_TREX410 |
Error while reading data for InfoObject &1 in drilldown |
| RSD_TREX411 |
Error while reading data for InfoObject &1 in drilldown of the database |
| RSD_TREX412 |
Error while reading data for InfoObject &1 in drilldown of BIA |
| RSD_TREX413 |
Index for table &1 not filled |
| RSD_TREX414 |
There is no BIA index for table &1 of InfoCube &2 |
| RSD_TREX415 |
Index for table &1 of InfoCube &2 does not exist in BIA |
| RSD_TREX416 |
Index for table &1 of InfoCube &2 exists in BIA, but not in BI |
| RSD_TREX417 |
There is an BIA index for table &1 of InfoCube &2 |
| RSD_TREX418 |
Characteristic: '&1' '&2' '&3' |
| RSD_TREX419 |
Comparison of aggregated key figures OK for InfoObject &1 in drilldown |
| RSD_TREX420 |
Comparison found deviation in key fig. &1 for InfoObject &2 in drilldown |
| RSD_TREX421 |
Check skipped for InfoObject &1 due to too much data |
| RSD_TREX422 |
BIA engine returned no data for InfoObject &1 |
| RSD_TREX423 |
Check with InfoObjekt &1 (Duration: &2 (seconds)) |
| RSD_TREX424 |
Key figs for InfoObject &1 in drilldown from BIA are same as query on DB |
| RSD_TREX425 |
Deviation between BIA and database on key figure &1 for InfoObject &2 |
| RSD_TREX426 |
Check for InfoObject &1 skipped due to too much data from BW |
| RSD_TREX427 |
Check for InfoOBject &1 skipped due to too much data from the BIA |
| RSD_TREX428 |
Check query reads from &1 (data source: '&2') |
| RSD_TREX429 |
Average of attribute &1 from table &2 is the same for DB and BIA |
| RSD_TREX430 |
Average of attribute &1 from table &2 (DB and BIA) within tolerance |
| RSD_TREX431 |
BIA returned an error for attribute &1 from table &2 |
| RSD_TREX432 |
Attribute &1 from table &2 is not numeric, no average |
| RSD_TREX433 |
Extreme deviation in average of attribute &1 from table &2 for DB and BIA |
| RSD_TREX434 |
At least one InfoCube must be selected for the check |
| RSD_TREX435 |
Check saved with ID '&1' |
| RSD_TREX436 |
No check with ID '&1' exists |
| RSD_TREX437 |
Check with ID '&1' deleted |
| RSD_TREX438 |
Check for InfoCube '&1' |
| RSD_TREX439 |
Number of records: DB table(s) '&1', index in BIA '&2' (delta: '&3') |
| RSD_TREX441 |
Check for consistency for BIA index of InfoCube '&1' returned an error |
| RSD_TREX442 |
You can find details of the checks in the application log (system '&1) |
| RSD_TREX443 |
Execute BIA index check with ID '&1' |
| RSD_TREX444 |
Execute BIA index checks |
| RSD_TREX500 |
<<<< RSRV and BIA Monitor Test Texts >>>> |
| RSD_TREX501 |
The logical index of the BIA index for InfoCube '&1' is correct |
| RSD_TREX502 |
The logical index of the BIA index for InfoCube '&1' is not correct |
| RSD_TREX503 |
Delta index is less than 10% of the main index ('&1', '&2'%) |
| RSD_TREX504 |
Delta index is more than 10% of the main index ('&1', '&2'%) |
| RSD_TREX505 |
Many changes in index for table '&1'; use delta index |
| RSD_TREX506 |
Parameter changes were accepted |
| RSD_TREX507 |
Adjust BIA index after InfoCube changes ('&1') |
| RSD_TREX508 |
Delete and rebuild all BIA indexes |
| RSD_TREX509 |
Check size of delta indexes for BIA indexes ('&1') |
| RSD_TREX510 |
Global indexing parameter for BIA indexes |
| RSD_TREX511 |
Compare index definition with database table ('&1') |
| RSD_TREX512 |
Check definition of logical index ('&1') |
| RSD_TREX513 |
Suggest delta indexes for certain indexes ('&1') |
| RSD_TREX514 |
Check: Table-index relationship |
| RSD_TREX515 |
Check: Check key figure sums internally |