| RSDD443 |
Compounded characteristic &1 set to fixed value &2 |
| RSDD444 |
'&1': Definition for aggregate is empty. It cannot be activated |
| RSDD445 |
'&2': InfoCube '&1' contains non-cumulatives: Time char. '&3' is finest |
| RSDD446 |
'&1': Rough time characteristics included in aggregate definition |
| RSDD447 |
'&1': Set to inactive for technical reasons. Changes are not possible |
| RSDD448 |
Update for buffer invalidation failed for InfoCube &1 |
| RSDD449 |
Error occurred checking characteristic '&1' in aggregate '&2' |
| RSDD450 |
'&2': Characteristic '&1' deleted as it no longer exists in InfoCube |
| RSDD451 |
Definitions of aggregate &1 and aggregate &2 are identical |
| RSDD452 |
'&2':InfoCube '&1' contains non-cumulatives: Char.'&3' is not in the Cube |
| RSDD453 |
'&2': Characteristic '&1' automatically included in definition |
| RSDD454 |
'&1': Index missing. 'Set Active' is only possible with transaction RSRV |
| RSDD500 |
Settings for BW statistics saved successfully |
| RSDD501 |
No data from the BW statistics could be read |
| RSDD502 |
Cannot determine new proposals for aggregates |
| RSDD503 |
First activate the recording of BW statistics for InfoCube &1 |
| RSDD504 |
Use the InfoSources for BW statisitcs 2.0 |
| RSDD505 |
For user '&1', logging of the query statistics is to be activated |
| RSDD506 |
Data deleted successfully from tables |
| RSDD600 |
<<<< Messages 600-699 reserved for general error messages >>> |
| RSDD601 |
Function module & no longer exists, please use & |
| RSDD602 |
Number range &1 for InfoCube &2 was increased to &3 |
| RSDD603 |
Number range of P dimension for aggregate &2 was set to &1 |
| RSDD604 |
Number range object &1 was deleted |
| RSDD612 |
Successfully finished converting InfoCube &1 |
| RSDD614 |
New SID entry for InfoObject &1 with value &2 created |
| RSDD619 |
Error when writing to the application log |
| RSDD623 |
Starting to convert ODS &1 |
| RSDD624 |
Successfully finished converting ODS &1 |
| RSDD628 |
----------------- &1 &2 &3 -------------- |
| RSDD629 |
Key figure &1 does not have the aggregation 'SUM' |
| RSDD700 |
<<<< Messages 700-799 reserved for aggregate construction msgs (KN) >>> |
| RSDD701 |
Log for selecting source aggregate for aggregate &1 or query: |
| RSDD702 |
__Aggregate &1 can be used as a source aggregate |
| RSDD703 |
__Aggregate &1 cannot be used as a source aggregate |
| RSDD704 |
__Aggregate &1 is better/smaller than the previous "best" |
| RSDD705 |
__Aggregate &1 is not better than the previous "best" |
| RSDD706 |
__No suitable aggregate found. Use InfoCube |
| RSDD707 |
____The subnodes cannot be used |
| RSDD708 |
====> Source aggregate is &1 |
| RSDD709 |
End of source aggregate selection |
| RSDD710 |
____More characteristics compressed than the aggregate/query |
| RSDD711 |
____Characteristic &3 is compressed but is not in the aggregate/query |
| RSDD712 |
____Key date for time-dependent attribute &3 is incorrect |
| RSDD713 |
____Characteristic/attribute &3 does not have aggregation level */% |
| RSDD714 |
____Characteristic/attribute &3 has incorrect fixed value / hier. nodes |
| RSDD715 |
____Characteristic/attribute &3 has a fixed value |
| RSDD716 |
____Characteristic/attribute &3 has an incorrect hierarchy or level |
| RSDD717 |
____Characteristic/attribute &3 has a fixed value, no compression |
| RSDD718 |
____Characteristic/attribute &3 has a node level, no compression |
| RSDD719 |
For aggregate &1: |
| RSDD720 |
&2 table: block characteristic &3, number of blocks: &4 |
| RSDD721 |
Block &1: From SID &2 to SID &3 (with ChangeID = &4) |
| RSDD722 |
Delta attribute changes for &2 (source &1), read &3, wrote &4 |
| RSDD723 |
Delta hierarchy changes for &2 (source &1), read &3, wrote &4 |
| RSDD724 |
Block &1: Same SID &2 (with ChangeID = &4) |
| RSDD725 |
Condensing of aggregate &1 is terminated |
| RSDD726 |
Condensation of aggregate &1 (process &2, time stamp &3) |
| RSDD727 |
Checking of aggregate &1 (process &2, time stamp &3) |
| RSDD728 |
Changes run for InfoCube &1 (process &2, time stamp &3) |
| RSDD729 |
Aggregate &1 is not active and filled |
| RSDD730 |
Aggregate &1: No records for DIMID &2 in P dim. -> DIMID was deleted |
| RSDD731 |
Aggregate &1: Partition &2 is empty --> partition deleted |
| RSDD732 |
Fragmentation expression for table &1 cannot be interpreted |
| RSDD733 |
Notification from form routine &1 in &2 |
| RSDD734 |
Dbspace: &1 expr: &2 |
| RSDD735 |
Parameter &1 is set: Fragmented aggregate structure deactivated |
| RSDD736 |
Table &1 is not in the database system catalog |
| RSDD737 |
Aggregate is structured by fragment |
| RSDD740 |
Roll up to/ compress to/ automatic compression: &1/ &2/ &3 |
| RSDD741 |
Read table '&4' (size: '&3'), BLOCKSIZE=&1 ===> block characteristic '&2' |
| RSDD742 |
Block '&3': '&1' (block size '&2') |
| RSDD743 |
Source for the aggregate structure: InfoCube/aggregate '&1' |
| RSDD744 |
The aggregate is 'flat', that is, it has less than 14 characteristics |
| RSDD745 |
Log for analyzing aggregate '&2 (technical name '&1')' |
| RSDD746 |
The block characteristic is NOT in the aggregate. Performance warning |
| RSDD747 |
Options "Display SQL Statement" and "Display Execution Plan" not possible |
| RSDD748 |
Choose only one aggregate |
| RSDD749 |
Entry for parameter not valid. Default value will be used |
| RSDD750 |
Temporary realignment run table '&1' was deleted |
| RSDD751 |
A cancelled or active realignment run is blocking this action |
| RSDD752 |
You can delete temporary realignment table '&1' |
| RSDD799 |
<<<< Messages 800-899 reserved for aggregate error messages >>> |
| RSDD800 |
Aggregate &1 successfully checked |
| RSDD801 |
Aggregate &1 not found |
| RSDD802 |
Aggregate &1 is empty |
| RSDD803 |
Check mode '&2' not possible for aggregate '&1' (reason: '&3') |
| RSDD804 |
Check for aggregate &1 terminated unexpectedly |
| RSDD805 |
Enter an InfoCube name |
| RSDD806 |
The check with the ID '&1' does not exist |
| RSDD807 |
No checks created for InfoCube '&1' |
| RSDD808 |
InfoCube '&1' does not exist |
| RSDD809 |
No checks with check time 'S' available for CheckID '&1('&2')' |
| RSDD810 |
Aggregate &1: Char &2 has type 'DPA' |
| RSDD811 |
Aggregate &1: Char &2 has type 'UNI' |
| RSDD812 |
Aggregate &1: Char./nav. attribute &2 has an incorrect aggregation status |
| RSDD813 |
Aggregate &1: Characteristic/navigation attr. &2 no longer in InfoCube |
| RSDD814 |
Unneeded check aggregates will be deleted |
| RSDD815 |
Check of aggregate &1 in mode '&2' started |
| RSDD816 |
Aggregates are only in display mode. Maintenance not possible |