| REAJCA020 |
Object is in an adjustment |
| REAJCA100 |
Rebasing: no points found for index series &1 year &2 on date &3 |
| REAJCP001 |
Enter the adjustment ID |
| REAJCP002 |
Enter the adjustment object |
| REAJCP003 |
Adjustment ID &1 does not exist |
| REAJCP004 |
No adjustments found for object |
| REAJCP005 |
No objects found for adjustment ID &1 |
| REAJCP006 |
Documents were output - you should save the data |
| REAJME000 |
&1 &2 &3 &4 |
| REAJME001 |
&1: entry is required for base year |
| REAJME002 |
&1: base year &2 does not exist |
| REAJME003 |
&1: an entry is required for the index series |
| REAJME004 |
&1: index series &2 does not exist |
| REAJME005 |
&1: the minimum change fields are not filled |
| REAJME006 |
&1: enter either first index level or start of index |
| REAJME007 |
&1: there is no index level on &2 for index series &3 |
| REAJME008 |
&1: index level (&2) not the same as 1st index level at index start |
| REAJME009 |
&1: the minimum change rate has to be between 0 and 100 |
| REAJME010 |
&1: make an entry for the adjustment frequency |
| REAJME011 |
&1: first adjustment from-date must be before condition start date &2 |
| REAJME012 |
&1: contract type &2 does not exist |
| REAJME013 |
&1: usage type &2 does not exist |
| REAJME014 |
&1: adjustment condition type &2 does not exist |
| REAJME015 |
&1: this method requires parameters |
| REAJME016 |
&1: enter either the contract type or only the usage type |
| REAJME017 |
&1: enter either increase or an absolute amount |
| REAJME018 |
&1: enter only one amount - absolute increase, abs. unit, or & increase |
| REAJME019 |
&1: condition type &2 is not allowed for contract type &3 |
| REAJME020 |
&1: condition type &2 is not allowed for usage type &3 |
| REAJME021 |
&1: enter at least one settlement ID |
| REAJME022 |
&1: enter the currency |
| REAJME023 |
&1: enter the frequency |
| REAJME024 |
&1: enter the calculation formula |
| REAJME025 |
&1: enter parameter 1 for the calculation formula |
| REAJME026 |
&1: enter parameter 2 for the calculation formula |
| REAJME027 |
&1: carryover condition type &2 does not exist |
| REAJME028 |
&1: for carryover you need to enter the adjustment condition type |
| REAJME029 |
Adjustment method is not yet implemented |
| REAJME030 |
&1: no adjustment since validity of condition unsuitable |
| REAJME031 |
&1: no adjustment, since appropriate parameter not found |
| REAJME032 |
&1: no adjustment due to different calculation formula |
| REAJME033 |
Correction: System considers pass-on percentage of &1 of rental object |
| REAJME034 |
Correction: System considers pass-on percentage of &1 of adjustment rule |
| REAJME035 |
Correction: No adjustment on &1, since only increases are allowed |
| REAJME036 |
Correction: No adjustment on &1, since only reductions are allowed |
| REAJME037 |
Correction: Unit price rounded from &1 to &2 |
| REAJME038 |
&1: no adjustment since the condition is locked |
| REAJME039 |
Adjustment date: Calculated valid-from date &1 replaced by modified &2 |
| REAJME040 |
Adjustment date: Valid-from date &1 since before condition start |
| REAJME041 |
&1: no adjustment since different condition amount reference |
| REAJME042 |
&1: no adjustment since different currency |
| REAJME043 |
&1: no adjustment since different frequency |
| REAJME044 |
Parameter conversion - formula from &1 to &2 |
| REAJME045 |
Parameter conversion - currency from &1 to &2 |
| REAJME046 |
Parameter conversion - frequency from &1 to &2 |
| REAJME047 |
Parameter conversion - condition amount reference from &1 to &2 |
| REAJME048 |
&1: no adjustment due to advance payment/flat rate |
| REAJME049 |
Adjustment date: base date is valid-from &1 of condition |
| REAJME050 |
Adjustment date: no frequency delay since frequency not defined |
| REAJME051 |
Adjustment date: delayed until start of frequency &1 |
| REAJME052 |
Adjustment date: Delayed by &1 frequency months until &2 |
| REAJME053 |
Adjustment date: Delayed by &1 frequency quarters until &2 |
| REAJME054 |
Adjustment date: Delayed by &1 frequency years until &2 |
| REAJME055 |
Corection: New unit price calculated is initial |
| REAJME056 |
Adjustment date: delayed until next possible notice date &1 |
| REAJME057 |
Adjustment date: delayed until start of next period &1 of condition |
| REAJME058 |
Adjustment date: Calculated valid-from date &1 replaced by modified &2 |
| REAJME059 |
Adjustment date: set to entered date &1 |
| REAJME060 |
Adjustment date: Calculated valid-from date &1 delayed until &2 |
| REAJME061 |
Adjustment date: Calculated valid-from date &1 reduced to &2 |
| REAJME062 |
No condition found for date &1 of last adjustment |
| REAJME063 |
No condition found for date &1 of first adjustment |
| REAJME064 |
Adjustment date: delayed until &1 due to exceeded change in points |
| REAJME065 |
Adjustment date: delayed until &1 due to achieved change in points |
| REAJME066 |
Adjustment date: delayed until &1 due to exceeded percentage change |
| REAJME067 |
Adjustment date: delayed until &1 due to percentage change reached |
| REAJME068 |
Adjustment date: cannot determine delay based on minimum change |
| REAJME069 |
No index points &1/&2 found on &3 |
| REAJME070 |
No index points found on the date of the last adjustment &1 |
| REAJME071 |
No index points found on the date of the first adjustment &1 |
| REAJME072 |
No index points found for today's date &1 |
| REAJME073 |
Adjustment date: not possible to determine reduction by minimum date |
| REAJME074 |
Adjustment date: reduced to &1 due to exceeded percentage change |
| REAJME075 |
Adjustment date: reduced to &1 due to percentage change being reached |
| REAJME076 |
Adjustment date: reduced to &1 due to exceeded change in points |
| REAJME077 |
Adjustment date: reduced to &1 due to change in points being reached |
| REAJME078 |
Adjustment date: base date replaced by &1 (first adjustment from-date) |
| REAJME079 |
No condition amount found for date &1 of last adjustment |
| REAJME080 |
No condition amount found for date &1 of first adjustment |
| REAJME081 |
No condition found for date &1 |
| REAJME082 |
No condition amount found for date &1 |
| REAJME083 |
Adjustment date: earliest with threshold &1 |
| REAJME084 |
Adjustment date: latest with threshold &1 |
| REAJME085 |
Adjustment date: rebasing from &1/&2 to &3/&4 is being performed |
| REAJME086 |
Adjustment date: minimum point change from &1 to &2 rebased |
| REAJME087 |
&1: no adjustment due to error in calculation of adjustment date |
| REAJME088 |
Adjustment date: adjustment limits due to points &1 &2 or &3 &4 |
| REAJME089 |
&1: no adjustment since adjustment date cannot be determined |
| REAJME090 |
Adjustment date: chaining of index series performed |
| REAJME091 |
Adjustment date: adjustment limits due to percentages &1 &2 or &3 &4 |