| QV109 |
The function module has not been created yet |
| QV110 |
Follow-up action level not permitted |
| QV111 |
Enter the stock transfer material for the transfer posting |
| QV112 |
First maintain the plant segment for material & & |
| QV113 |
Material & for transfer posting is copied from transfer posting batch |
| QV114 |
Stock transfer to EWM-managed storage location is not possible |
| QV115 |
Plant & has not been assigned to a controlling area |
| QV116 |
Usage decision for lot & & is saved |
| QV117 |
Stock posting for the inspection lot is not finished |
| QV118 |
The sum of the quantities that still must be posted is & |
| QV119 |
Maintain the cost center & and controlling area & completely |
| QV120 |
First create the cost center & and the controlling area & |
| QV121 |
Selected set code does not exist, or data entered is incomplete |
| QV122 |
Use the function "Usage decision selection" |
| QV123 |
You do not have the authorization for usage decision & & & & |
| QV124 |
Short-term inspections are still open |
| QV125 |
Material & is marked for deletion |
| QV126 |
Inspections are still open |
| QV127 |
The next inspection for a usage decision is & |
| QV128 |
Internal error - Authorization for usage decision & & & & |
| QV129 |
Internal error - Authorization for stock postings |
| QV130 |
No usage decision was selected |
| QV131 |
Batch & & created |
| QV132 |
You do not have authorization for inspection type & |
| QV133 |
All processed characteristics are displayed (characteristic filter &) |
| QV134 |
Characteristics were selected according to characteristic filter & |
| QV135 |
You are not authorized to close inspections with open required characs. |
| QV136 |
Internal error during authorization check |
| QV137 |
Inspection closure not meaningful due to delivery certificate status |
| QV138 |
Goods have not been delivered yet; UD prevents delivery note changes |
| QV139 |
Inspection type & is not supported |
| QV140 |
Inspection lot origin & needs to be maintained |
| QV141 |
Inspection lot origin & is not defined |
| QV142 |
Select the function "Usage decision selection" |
| QV143 |
Posting >> & << was copied |
| QV144 |
No stock proposal available |
| QV145 |
No changes were carried out |
| QV146 |
Rejected partial lots exist; delivery is not possible |
| QV147 |
The current status of partial lot &1 does not allow the desired activity |
| QV148 |
Sample and reserve quantity exceeds the MM sample stock |
| QV149 |
Position the cursor on a characteristic |
| QV161 |
No inspection lot was selected |
| QV164 |
Inspection lot & was not created yet |
| QV179 |
Internal error in form &- incorrect transmission data |
| QV180 |
Maintain inspection lot status (requirements) for & & |
| QV181 |
Access to inspection lot & is not allowed |
| QV182 |
Maintain inspection lot status (setting status) for & & |
| QV183 |
The synchr.update indicator is taken into account starting with Rel. 3.0 |
| QV200 |
Error during stock postings: see log |
| QV201 |
Internal error: Table TQ07M is not maintained for field & |
| QV202 |
Maintain quality score procedure & |
| QV203 |
Error during quality score calculation (-> PF1) |
| QV204 |
No characteristic results are available for inspection lot & |
| QV205 |
Share of scrap has changed; Recalculate the quality score, if necessary |
| QV206 |
Follow-up action & cannot be used |
| QV207 |
Choose a higher quality score: Lower limit: & |
| QV208 |
Choose a lower quality score: Upper limit: & |
| QV209 |
Make a usage decision before you enter the quality score |
| QV210 |
Internal error: ASSIGN field & contains errors with return code & |
| QV211 |
Follow-up action & not allowed for usage & |
| QV212 |
Posting to sample allowed only up to a lot size of & |
| QV213 |
Internal error - entry & missing from table IMSEG |
| QV214 |
Inspection is still active. Remaining sample quantity is equal to &1 &2 |
| QV215 |
Internal error - remaining quantity & to be posted was corrected to 0 |
| QV216 |
No operations could be found |
| QV217 |
There are no characteristics for this inspection lot |
| QV218 |
Material & not maintained for plant & |
| QV219 |
Material & does not exist (check your entry) |
| QV220 |
No material documents available |
| QV221 |
Status change in Q-info record was carried out |
| QV222 |
Status in Q-info record is not changed |
| QV223 |
Confirmation number missing. Data cannot be displayed |
| QV224 |
Operation & not available for this lot |
| QV225 |
Enter a reason for the return delivery |
| QV226 |
A minimum of one defect item must be selected for this function |
| QV227 |
Internal error: Entry parameter QSS1_PARTIAL_LOT_FEATURE_SHOW initial |
| QV228 |
Selected set &1 copied from inspection type &3 and/or plant &2 derived |
| QV300 |
Enter a movement type |
| QV496 |
Material & & is not inspection-relevant (QMAT) |
| QV507 |
Log 'Recurring inspection' & &, & |
| QV508 |
No entries found |
| QV509 |
No batches have been found for processing |
| QV510 |
Recurring inspection required |
| QV511 |
Date for recurring inspection reached |
| QV512 |
Batch expiration date reached |
| QV513 |
Inspection lot creation was not possible |
| QV514 |
Inspection lot & could not be blocked. Quantity posting not possible. |
| QV516 |
Transfer posting doc. item & |
| QV517 |
Trans. posting doc & created |
| QV518 |
Inspection lot & created |
| QV519 |
Inspection lot & changed |
| QV520 |
Batch status changed to 'Restricted' |
| QV521 |
Batch status already changed (see above) |
| QV522 |
Inspection lot & incomplete |
| QV523 |
Outstanding inspection lot & to & & & exists |
| QV801 |
No change documents exist |
| QV_ADDON001 |
Operation UD not planned (no entry in table TQEC30 for &1 &2) |
| QV_ADDON002 |
Operation UD not allowed for inspection type &1 and plant &2 (TQEC30) |
| QV_ADDON003 |
No operation completion recorded for inspection lot & |
| QW000 |
Select the correct column |