| QMIP_EA113 |
Select at least one row |
| QMIP_EA114 |
Characteristics have been converted |
| QMIP_EA115 |
Mapping for value assign.type &1 cannot be determined (see trans. CGQM) |
| QMIP_EA116 |
Selected characteristic has already been converted |
| QMIP_EA117 |
Error when creating master inspection characteristic |
| QMIP_EA118 |
Characteristic &1 already exists |
| QMIP_EA119 |
Mapping for value assignment type &1 not complete (see transaction CGQM) |
| QMIP_EA120 |
You cannot combine control indicators |
| QMIP_EA121 |
Implementation for data source &2 returns illegal data type &1 |
| QMIP_EA122 |
Master insp. char. missing in mapping for value assgmt type &1 (see CGQM) |
| QMIP_EA123 |
MIC missing in mapping for value assignment type &1, substance &2 |
| QMIP_EA124 |
Plant &1 for characteristic &2 does not exist |
| QMIP_EA125 |
Plant must be entered for '&1' |
| QMIP_EA126 |
>>> Messages for Characteristic: "&1" <<< |
| QMIP_EA200 |
------------- Messages for Inspection Plan Maintenance --------------- |
| QMIP_EA201 |
No catalog entries found for source catalog type &1 |
| QMIP_EA202 |
Inspection plan &1 &2 &3 cannot be loaded |
| QMIP_EA203 |
Additional selection conditions for source type &1 are shown |
| QMIP_EA204 |
There is no inspection plan for object &1 &2 &3 |
| QMIP_EA205 |
No material is assigned to specification &1 |
| QMIP_EA206 |
Material &1 in plant &2 is not assigned to the inspection plan |
| QMIP_EA207 |
Inspection plan &1 &2 &3 cannot be assigned to source object &4 |
| QMIP_EA208 |
No QM-relevant ratings exist |
| QMIP_EA209 |
Select at least one characteristic in the source object |
| QMIP_EA210 |
Select exactly one operation in plan |
| QMIP_EA211 |
Select an operation in the inspection plan |
| QMIP_EA212 |
Consistency check for copying characteristics was successful |
| QMIP_EA213 |
No characteristics will be created for the inspection plan |
| QMIP_EA214 |
Message log contains errors; Inspection plan was not saved |
| QMIP_EA215 |
There are no changes; Inspection plan was not saved |
| QMIP_EA216 |
No characteristics for source can be copied to inspection plan |
| QMIP_EA217 |
Properties of validity area 'Plant &1' are considered |
| QMIP_EA218 |
Some components of composition &1 are contained in the inspection plan |
| QMIP_EA219 |
Several master insp.chars are assigned to value assignment type &1 |
| QMIP_EA220 |
Codes will be added to code group &1 |
| QMIP_EA221 |
Material master record &1 is not in any specified plant |
| QMIP_EA222 |
Quality view for material master record &1 in plant &2 does not exist |
| QMIP_EA223 |
Master inspection characteristic &1 in plant &2 not found |
| QMIP_EA224 |
Inconsistency of control indicator "quantitative characteristic" - &1 &2 |
| QMIP_EA225 |
Inconsistency of control indicator "quantitative characteristic" - &1 &2 |
| QMIP_EA226 |
Control indicators for &1 &2 allow for an upper specification limit |
| QMIP_EA227 |
Control indicators for &1 &2 allow for a lower specification limit |
| QMIP_EA228 |
Specification characteristic &1 allows for an upper specification limit |
| QMIP_EA229 |
Specification characteristic &1 allows for a lower specification limit |
| QMIP_EA230 |
No inspection plan exists for specification or plan is deleted |
| QMIP_EA231 |
Consistency check was run successfully |
| QMIP_EA232 |
Characteristic number is a required entry (data source &1) |
| QMIP_EA233 |
Characteristic number &1 can only be assigned once |
| QMIP_EA234 |
Complete the data for the source |
| QMIP_EA235 |
There are no messages yet |
| QMIP_EA236 |
No common plants with regard to ratings and material/plan assignments |
| QMIP_EA237 |
No target value could be determined for value assignment type &1 |
| QMIP_EA238 |
No tolerance limits could be determined for value assignment type &1 |
| QMIP_EA239 |
A new link is created for object &1 &2 &3 |
| QMIP_EA240 |
Value assignment type &1 is not valid for plant &2 |
| QMIP_EA241 |
Value assignment type &1 not valid for plants in material/plan assignment |
| QMIP_EA242 |
Future state of plan already takes property &1 into account |
| QMIP_EA243 |
No material/plan assignment was determined |
| QMIP_EA244 |
Materials must also be copied for plant-related material/plan assignments |
| QMIP_EA245 |
Specification &1 is only valid from &2 |
| QMIP_EA300 |
------------- Synchronization ------------------------------------------- |
| QMIP_EA301 |
No matching specification/inspection plan combination found |
| QMIP_EA302 |
No changes to be synchronized found |
| QMIP_EA303 |
Update date is locked for inspection plan &1 &2 |
| QMIP_EA304 |
This function is not supported for selected object |
| QMIP_EA305 |
Messages that occurred were collected in the log (no. of errors: &1) |
| QMIP_EA306 |
No line was selected (selection via first icon in line) |
| QMIP_EA307 |
There are no characteristics to be synchronized for plan &1/&2/&3 |
| QMIP_EA308 |
Internal program error |
| QMIP_EA309 |
Plan change with change number &1 from specification &2 not possible |
| QMIP_EA310 |
Synchronization of plan &1 with validity from &2 started |
| QMIP_EA311 |
Synchronization of characteristic &1 with property &2 started |
| QMIP_EA312 |
No properties were found for synchronization |
| QMIP_EA313 |
Inspection plan &1 does not yet exist in date range &2 - &3 |
| QMIP_EA314 |
Confirmation of synchronization not possible for this line |
| QMIP_EA315 |
Transfer of characteristics is only possible for selected plans |
| QMIP_EA316 |
Synchronization is not supported at plan level |
| QMIP_EA317 |
Unit conversion for characteristic &1 in operation &2 failed |
| QMIP_EA318 |
Inspection plan &1/&2/&3 was changed successfully |
| QMIP_EA319 |
Characteristic &1 from operation &2 via property &3 updated |
| QMIP_EA320 |
Dependent specs. for char. &1 from operation &2 via property &3 updated |
| QMIP_EA321 |
No data transfer from property &3 to characteristic &1 from operation &2 |
| QMIP_EA322 |
No new material/plan assignments to be created (no deletion) |
| QMIP_EA323 |
Characteristic &1 from operation &2 is not yet valid on &3 |
| QMIP_EA324 |
No assigned inspection plan characteristic exists yet for property &1 |
| QMIP_EA325 |
No autom. transfer owing to customer-spec. logic for value assgmt type &1 |
| QMIP_EA326 |
Function module &1 for value assignment type &2 is not called |
| QMIP_EA327 |
Changes to phrases cannot be synchronized (&1) |
| QMIP_EA328 |
Entry &1 does not exist |
| QMIP_EA350 |
--------------- Messages for Creating Catalog Data ---------------------- |
| QMIP_EA351 |
Error when creating selected set: &1 |
| QMIP_EA352 |
No defect classes defined in Customizing for catalog |
| QMIP_EA353 |
Selected set &3 plant &4 already exists for source &1 / &2 |
| QMIP_EA354 |
No selected set will be created for the quantitative characteristic &1 |
| QMIP_EA355 |
No selected set exists for source &1 / &2 |
| QMIP_EA356 |
No codes can be derived for &1 &2 for the qualitative characteristic |
| QMIP_EA357 |
Standard values for source characteristic &1 could not be determined |
| QMIP_EA358 |
Based on MIC &1/&2, &3 is created as quantitative characteristic |
| QMIP_EA359 |
Based on MIC &1/&2, &3 is created as qualitative characteristic |
| QMIP_EA400 |
-------------- Messages Regarding EH&S-QM Mappings ---------------------- |