| BRAIN070 |
No SID found for value '&' of characteristic & |
| BRAIN071 |
Could not enter feature &1 with SID &2 into table &3 |
| BRAIN072 |
Internal structure for hierarchy & is inconsistent |
| BRAIN073 |
Error when writing the SID &1 (value "&2") in table &3 |
| BRAIN074 |
Hierarchy has been adjusted. Start the query again. |
| BRAIN075 |
Read mode is converted to 'Read query when navigating' |
| BRAIN076 |
You cannot place a presentation hierarchy on characteristic &1 |
| BRAIN077 |
You cannot change variable &1 for charact. &2 during query navigation |
| BRAIN078 |
Attribute &1 for characteristic &2 in variable &3 is not numerical |
| BRAIN079 |
Attribute &1 for characteristic &2 in variable &3 does not exist |
| BRAIN080 |
A summation is not possible for character key figures &1 &2 |
| BRAIN081 |
Constant selection special function not available on 0INFOPROV |
| BRAIN082 |
Constant selection special function not available on 0INFOPROV |
| BRAIN083 |
A query cannot have globally constant elements in both structures |
| BRAIN084 |
The property 'display non accounted values' is not allowed here |
| BRAIN085 |
Variable &1 is not supported in exceptions |
| BRAIN086 |
Key figure &1 &2 has unit &3. However &3 is not an InfoProvider |
| BRAIN087 |
Different hierarchies are used for characteristic &1 |
| BRAIN088 |
Characteristic &1 blocked for SID retrieval |
| BRAIN089 |
Save table SIZE parameters were optimized for query &1 |
| BRAIN090 |
'Calculating result as...' was not executed |
| BRAIN091 |
Function 'Calculating single values as...' cumulative was not executed |
| BRAIN092 |
Calculated single values as ... has priority |
| BRAIN093 |
Calculated key figure &1 is not defined correctly |
| BRAIN094 |
Generation of master data routine for characteristic &1 blocked |
| BRAIN095 |
Some numbers are scaled. They are parenthesized in debug mode [ ] |
| BRAIN096 |
Numbers recalculated locally;bracketed in debug mode [ ]; LPC_OFF = '&1' |
| BRAIN097 |
Sorting by value has to be changed due to missing authorization |
| BRAIN098 |
Condition & active |
| BRAIN099 |
Local Calculation Active for & |
| BRAIN100 |
Zero suppression is active |
| BRAIN101 |
Characteristic &3 not available in InfoProvider |
| BRAIN102 |
Query & uses deleted key figure & |
| BRAIN103 |
Cannot use variable &1 in structure elements |
| BRAIN104 |
Conditions are active. Results are bracketed in debug mode [ ] |
| BRAIN105 |
Char. &1 is cumulated. Values are bracketed in debug mode [ ] |
| BRAIN106 |
A key figure has to be uniquely specified in all cells |
| BRAIN107 |
The query has to specify a key figure |
| BRAIN108 |
Currency translation cannot be carried out for element &1 &2 |
| BRAIN109 |
No data was found that meets the used conditions |
| BRAIN110 |
Key figure definition shows other value for key figure &1 |
| BRAIN111 |
Local currency translation &1 active |
| BRAIN112 |
Constant selection is activated. Figures are parenthesized [ ] |
| BRAIN113 |
Some key figures have exception aggregation. Figures have parentheses [ ] |
| BRAIN114 |
-- obsolet -- |
| BRAIN115 |
There are calculated elements. These results are bracketed [ ] |
| BRAIN116 |
InfoProvider &1 does not exist |
| BRAIN117 |
Variable &2 is not permitted for the target currency |
| BRAIN118 |
SQL error occurred while reading value set table &1 |
| BRAIN119 |
Variable &2 is not allowed for the conversion key date |
| BRAIN120 |
Variable &2 is not permitted for exchange rate type |
| BRAIN121 |
&1 is not a valid key figures for InfoProvider &2 |
| BRAIN122 |
&1 is not a valid characteristic for InfoProvider &2 |
| BRAIN123 |
Query &1/&2 cannot have read mode 'A' |
| BRAIN124 |
Transfer table THX_FORM is not correct |
| BRAIN125 |
Unable to generate query &2 without errors |
| BRAIN126 |
The program generated exceeds generation limits |
| BRAIN127 |
No errors were found. |
| BRAIN128 |
Determination of characteristic &1 is not permissible |
| BRAIN129 |
Too many characteristics (&1) are relevant for authorization |
| BRAIN130 |
Fiscal year variant is to be specified for key figure &1 |
| BRAIN131 |
A results row cannot be calculated |
| BRAIN132 |
The variable &2 is not permitted for the source currency |
| BRAIN133 |
Presentation hierarchy &2 acts as a dynamic filter |
| BRAIN134 |
Variable &1 for query key date has been changed to a required entry |
| BRAIN135 |
Key figure &2 (&1) contains an unknown operation. |
| BRAIN136 |
The query cannot be released for OLE DB for OLAP |
| BRAIN137 |
The query cannot be released for OLE DB for OLAP |
| BRAIN138 |
Normalization to query result not possible due to insufficient auth. |
| BRAIN139 |
Variable &1 obsolete. Up-to-dateness of data will be set to '&3' |
| BRAIN140 |
Cumulated and ranked list exclude each other |
| BRAIN141 |
'Calculating result as...' was not executed |
| BRAIN142 |
'Calculate as...' is deactivated for lists with hierarchy |
| BRAIN143 |
Technical Information: &1 &2 &3 &4 |
| BRAIN144 |
There is a condit. on &1, results row suppress. active on &2 (conditional |
| BRAIN145 |
Function 'Calculate as...' cannot be executed |
| BRAIN146 |
In data currentness 'All data (3)' the cache is disabled |
| BRAIN147 |
Partitioning type '&3' is not appropriate for query &1/&2 |
| BRAIN148 |
For input-ready queries on aggregation levels, cache is not possible |
| BRAIN149 |
The 'Display Non Postable Values' option has been activated |
| BRAIN150 |
InfoProvider '&1' contains too many characteristics for the display |
| BRAIN151 |
InfoProvider '&1' not available |
| BRAIN152 |
MultiProvider &2 is not defined correctly |
| BRAIN153 |
Characteristic &1 of Part Provider &2 is supplied with two diff. values |
| BRAIN154 |
Characteristic &1 is not filled by InfoProvider &2 |
| BRAIN155 |
The characteristic &1 has to have a fixed value &3 in InfoProvider &2 |
| BRAIN156 |
Key figure &1 can be not processed consistently in InfoCube &4 |
| BRAIN157 |
Key figure &2 cannot be processed consistently in InfoProvider &3 |
| BRAIN158 |
Currency/Unit may not be initial |
| BRAIN159 |
The key figures are input on currency/units &1 &2 &3 |
| BRAIN160 |
&1 &2 cannot be input ready. It is formula element. |
| BRAIN161 |
&1 &2 cannot be input. &3 is not a basic key figure. |
| BRAIN162 |
&1 &2 cannot be input. &3 has aggregation &4 |
| BRAIN163 |
&1 &2 cannot be input ready. &3 does not belong to an InfoProvider |
| BRAIN164 |
Input readiness of the query &1/&2 is disabled |
| BRAIN165 |
InfoProvider &1 does not contain an InfoCube or DS; no input possible |
| BRAIN166 |
&1/&2 contains no input ready elements; input readiness is disabled |
| BRAIN167 |
&1 &2 cannot be input ready |
| BRAIN168 |
The settings for characteristic &1 and input mode &2 are incompatible |
| BRAIN169 |
Input readiness of &1/&2 disabled; &2 still setting locks |