| AH071 |
Enter from-date |
| AH072 |
Delete all values before you specify a replacement value |
| AH073 |
Measured pressure &1 is larger than permitted maximum value &2 |
| AH074 |
From-nominal load &1 greater than to-nominal load &2 |
| AH075 |
No entries for billing class &1 in table &2 |
| AH076 |
Gas procedure &1 not in table &2 |
| AH077 |
Please also maintain gas law deviation factor after correcting GLD factor |
| AH078 |
Only enter air pressure (corr.) if thermal gas billing = 00 or 01 |
| AH079 |
Only enter averaging type/avg from/fixed temp.if thermal gas billing = 00 |
| AH080 |
Enter either fixed temperature or averaging type/average from |
| AH081 |
Enter both "averaging type" and "average from" |
| AH082 |
Enter all rounding attributes |
| AH083 |
Normal air pressure &1 deviates from standard value &2 |
| AH084 |
Specify the conversion factor for dimension conversion |
| AH085 |
No gas law deviation factor correction is possible for factor 01 |
| AH086 |
You have already specified a replacement value for the operand |
| AH087 |
Values already exist for operand &1 (season &2) |
| AH088 |
Specify an operand |
| AH089 |
Operand &1 is not of category &2 |
| AH090 |
Rate type &1 already exists |
| AH091 |
Only choose usage type if "fixed volume correction factor" is used |
| AH092 |
General control indicators are partially ignored in special procedure |
| AH093 |
Gas law deviation factor 01 only possible for temp./pressure billing |
| AH094 |
Maintain temperature component |
| AH095 |
Special proc. "no temperature" only necessary for thermal gas billing 00 |
| AH096 |
Specify either number of outsortings or permanent outsorting |
| AH097 |
Only maintain rounding rules when using 'conversion factor' |
| AH098 |
Changes to facts were made |
| AH099 |
Maintain an operand value for operand &1 |
| AH100 |
Installation &1 was already billed on &2 |
| AH101 |
Value of command &1 (ARCR &2) greater than first value ( &3 ) |
| AH102 |
Value of command &1 (ARCR &2) greater than value in operation mode & (&) |
| AH103 |
Reference value can only be limited (on &) |
| AH104 |
Reference value was deleted |
| AH105 |
Reference value was limited |
| AH106 |
Cal. val. proc. &1 cal. val. district &2: no billing cal. value exists |
| AH107 |
Should later time slices be maintained first? |
| AH108 |
Calorific value district &1 not in table &2 |
| AH109 |
Entry/entries maintained |
| AH110 |
Maintain entry |
| AH111 |
Calorific values to be billed are outside of normal limits |
| AH112 |
No entry exists for date &1 |
| AH113 |
Franchise fee price is only possible for quantity-based price operands |
| AH114 |
Calorific value &1 is not between &2 and &3 |
| AH115 |
No calorific value in table &1 for period &2 |
| AH116 |
Supplier calorific value date &1 in table &2 is zero |
| AH117 |
Company calorific value date &1 in table &2 is zero |
| AH118 |
Changes were made to operand &1 |
| AH119 |
No register use possible in reference base &1 |
| AH120 |
Price &1, price category &2, pricing level &3 does not exist |
| AH121 |
Franch. fee prices w. start value can only be maintained in inst. facts |
| AH122 |
Enter only one value for date &1 |
| AH123 |
Enter only one value for the period &1 to &2 |
| AH124 |
Do not use price type "blocks/scales" in price category 3 |
| AH125 |
Specify a price level for price category 3 only |
| AH126 |
Do not use price adjustment clauses for average price |
| AH127 |
Specify a from-zone (otherwise no other entry is possible) |
| AH128 |
Block maintenance for date &1 canceled |
| AH129 |
Block maintenance for date &1 ended |
| AH130 |
Entry/entries with 'valid from' &1 already exist |
| AH131 |
No entry exists for date &1 from block &2 |
| AH132 |
Internal: to-date in same from-date group inconsistent |
| AH133 |
Indicator 'ignore consumption' for date &1 not transferred |
| AH134 |
No facts available |
| AH135 |
Enter a variant program |
| AH136 |
Internal: to-date of the most current record is missing |
| AH137 |
Internal: to-date <> from-date of previous record - 1 day |
| AH138 |
To-block of the current record must be &1 (block maintenance) |
| AH139 |
To-block &1 <> from-block &2 of previous record |
| AH140 |
You are not permitted to maintain operands of category &1 in the &2 |
| AH141 |
You are not permitted to specify a season for operands of category &1 |
| AH142 |
Price is consistent |
| AH143 |
Smallest from-block &1 is not zero |
| AH144 |
Specify a rate category |
| AH145 |
Reference for price category and pricing level &1 &2 &3 not available |
| AH146 |
Price type &1 must agree with price type &2 of the reference |
| AH147 |
Price category &1 must agree with price category &2 of the reference |
| AH148 |
Pricing level &1 must agree with pricing level &2 of the reference |
| AH149 |
Enter a price |
| AH150 |
Enter a price category |
| AH151 |
Select "With price history" only when selecting a reference |
| AH152 |
Enter a price type |
| AH153 |
Enter a price reference |
| AH154 |
Enter a reference for price category |
| AH155 |
Enter a rate type |
| AH156 |
Price category/level &1 &2 &3 is still used -> where-used list |
| AH157 |
Price/category &1 &2 is still used -> where-used list |
| AH158 |
Internal error in determining possible entries (&1, &2) |
| AH159 |
No matching price references found |
| AH160 |
Not a valid line selection |
| AH161 |
Enter a to-date that is after the from-date |
| AH162 |
Error in user exit &1 |
| AH163 |
Historical data will be lost |
| AH164 |
Enter an operand from category &1 |
| AH165 |
Select the operand you wish to copy |
| AH166 |
Enter a time basis smaller than or equal to &1 |
| AH167 |
Complete your entry |
| AH168 |
Parameter &1 not specified |
| AH169 |
Invalid value &1 for parameter &2 |
| AH170 |
Possible entries for pricing level only possible for valid price category |