| ADS2KIPUPL_AL108 |
If SPC is 2/6 then URR/TCBSV/TCBO/TCC/MST should not be Initial |
| ADS2KIPUPL_AL109 |
If PRP is alpha, then an EC coded 11/13/14/15 must be present |
| ADS2KIPUPL_AL110 |
If PRCC is 1 then PNRV must be present with EC20 |
| ADS2KIPUPL_AL111 |
If PRCC is 2 then PNRV must be present with EC56 |
| ADS2KIPUPL_AL112 |
If PRCC is 4 then PNRV must be present with EC58 |
| ADS2KIPUPL_AL113 |
If PRCC is 1/6, then UNP must be same as EC20 PBP |
| ADS2KIPUPL_AL114 |
If SPQ is given, then Start PBQ/End PBQ must be in multiples of SPQ |
| ADS2KIPUPL_AL115 |
If PRCC is 6, then MSQ should be given |
| ADS2KIPUPL_AL116 |
If PRCC is 6, then first Start PBQ should be equal to MSQ |
| ADS2KIPUPL_AL117 |
If Effectivity Overflow is 1, then ADRV must be present with EC48 |
| ADS2KIPUPL_AL118 |
IF MOR is 1/6 & SPC 1/2/6, then ESS should be 1/2/3 otherwise always 0 |
| ADS2KIPUPL_AL119 |
First Effectivity should not be initial for ADRF |
| ADS2KIPUPL_AL120 |
First Effectivity should not be initial for EC48 |
| ADS2KIPUPL_AL121 |
Invalid Change Code: Explanation Code Segment &1/&2/&3 Rejected |
| ADS2KIPUPL_AL122 |
Text cannot be initial for Explanation Code Segment &1/&2/&3 |
| ADS2KIPUPL_AL123 |
ADRF Rejected as change code is invalid |
| ADS2KIPUPL_AL124 |
ADRV EC48 occurs without Effectivity Overflow |
| ADS2KIPUPL_AL125 |
ADRV EC48 occurs without ADRF |
| ADS2KIPUPL_AL126 |
Literal is invalid for EC &1/&2/&3 - Segment Rejected |
| ADS2KIPUPL_AL127 |
EC Segment Text cannot be initial for &1/&2/&3 - Segment Rejected |
| ADS2KIPUPL_AL128 |
EC Segment &1/&2/&3 cannot be Revised - Segment Rejected |
| ADS2KIPUPL_AL129 |
Unit of measure &1 is not 'Each (EA)' |
| ADS2KIPUPL_AL130 |
EC80 required for non definitive Unit of Measure &1 |
| ADS2KIPUPL_AL131 |
UNT is mandatory for new part |
| ADS2KIPUPL_AL132 |
Part Rejected - Customer Extensions |
| ADS2KIPUPL_AL400 |
***** SPEC2000 IP Upload - Application Layer Messages (S & T File) ****** |
| ADS2KIPUPL_AL401 |
File &1 Rejected-Header Record faulty |
| ADS2KIPUPL_AL402 |
Blank PNR-MFR - Record Rejected |
| ADS2KIPUPL_AL403 |
Invalid Record Type - Record Rejected |
| ADS2KIPUPL_AL499 |
|
| ADS2KIPUPL_AL500 |
**** SPEC2000 IP Upload - Application Layer Technical Check Messages **** |
| ADS2KIPUPL_AL501 |
Definition of TEI '&1' not found in customizing view VADS2KIPUPL_DTEL |
| ADS2KIPUPL_AL502 |
TEI '&1' value '&2' is less than the minimum length |
| ADS2KIPUPL_AL503 |
TEI '&1' value '&2' is greater than the maximum length |
| ADS2KIPUPL_AL504 |
TEI '&1' value '&2' is not alpha |
| ADS2KIPUPL_AL505 |
TEI '&1' value '&2' is not numeric |
| ADS2KIPUPL_AL506 |
Technical Check failed for TEI '&1' Value '&2' |
| ADS2KIPUPL_AL507 |
Value '&1' of TEI '&2' is invalid |
| ADS2KIPUPL_AL508 |
TEI '&1' Value '&2' is not a valid date |
| ADS2KIPUPL_AL509 |
TEI '&1' Value '&2' is not a valid time |
| ADS2KIPUPL_AL600 |
******* SPEC2000 IP Upload - Application Layer Messages (V File) ******** |
| ADS2KIPUPL_AL601 |
&1-&2/RF01/File Rejected - Header Record faulty |
| ADS2KIPUPL_AL602 |
&1-&2/RF02/File Rejected - No data records |
| ADS2KIPUPL_AL603 |
&1-&2/Header Record Repeating |
| ADS2KIPUPL_AL604 |
Header TEIs &1 are mandatory |
| ADS2KIPUPL_AL605 |
&1/&2/&3/RR01/Record Rejected-Key Element not according to DD-Format |
| ADS2KIPUPL_AL606 |
&1/&2/&3 RR02/Record Rejected-Key Element not according to DD-Value |
| ADS2KIPUPL_AL607 |
&1/&2/Record Rejected-Key Element not according to DD-Format |
| ADS2KIPUPL_AL608 |
&1/&2/&3 RR03/Record Rejected-Record already existing |
| ADS2KIPUPL_AL609 |
&1/&2/&3 RR04/Record Rejected-Record not existing |
| ADS2KIPUPL_AL610 |
&1/&2/&3/RS01/Segment Rejected-Key Element not according to DD-Format |
| ADS2KIPUPL_AL611 |
Mandatory TEI(s) &1 missing |
| ADS2KIPUPL_AL612 |
&1/&2/&3 RS03/Segment Rejected-Segment already existing |
| ADS2KIPUPL_AL613 |
&1/&2/&3 RS04/Segment Rejected-Segment not existing |
| ADS2KIPUPL_AL614 |
No Provisioning Data Segment in record |
| ADS2KIPUPL_AL615 |
Neither CBS nor LMS Segment in record |
| ADS2KIPUPL_AL616 |
PNS must start with RTC 12/SEG PNS/CHG .../MFR .../PNR .../ |
| ADS2KIPUPL_AL617 |
SEG &1/Invalid Segment - SEG should be PDS, LMS, EIS or CBS |
| ADS2KIPUPL_AL618 |
Mandatory TEI &1 missing |
| ADS2KIPUPL_AL619 |
&1/&2/&3/&4/RE02/TEI unknown |
| ADS2KIPUPL_AL620 |
&1/&2/&3/&4/RE03/TEI not according to DD-Format |
| ADS2KIPUPL_AL621 |
&1/&2/&3/&4 RE04/TEI not according to DD-Value |
| ADS2KIPUPL_AL622 |
&1/&2/&3/&4/RE05/TEI unknown in segment/record |
| ADS2KIPUPL_AL623 |
&1/&2/PDS Seg must start with SEG PDS/CHG .../SPL .../ |
| ADS2KIPUPL_AL624 |
&1/&2/LMS Seg must start with SEG LMS/CHG .../CSN .../ |
| ADS2KIPUPL_AL625 |
&1/&2/EIS Seg must start with SEG EIS/CHG .../EIM .../EIP .../ |
| ADS2KIPUPL_AL626 |
&1/&2/CBS Seg must start with SEG CBS/CHG .../EIM .../EIP .../CSN .../ |
| ADS2KIPUPL_AL627 |
PNR &1/MFR &2/SEG &3/TEI &4 Rejected - Repeating Element |
| ADS2KIPUPL_AL628 |
Invalid record in input file |
| ADS2KIPUPL_AL629 |
EIS and CBS should either exist together or not exist together |
| ADS2KIPUPL_AL630 |
&1/&2/&3/Segment Rejected - No CBS segment corresponding to EIS segment |
| ADS2KIPUPL_AL631 |
Segment Rejected - No EFF in LMS segment |
| ADS2KIPUPL_AL632 |
&1 &2/RR01/Record Rejected-Key Element not according to DD-Format |
| ADS2KIPUPL_AL633 |
TEI &1 not according to specified value |
| ADS2KIPUPL_AL634 |
Segment Rejected: &3 Change Code &1 Inconsistent with &4 Change Code &2 |
| ADS2KIPUPL_AL635 |
CBS cannot occur without EIS for a new part |
| ADS2KIPUPL_AL650 |
Header TEI &1 repeated. File Rejected. |
| ADS2KIPUPL_AL651 |
Header TEI &1 unknown. File Rejected |
| ADS2KIPUPL_AL652 |
// occured in input file |
| ADS2KIPUPL_AL653 |
Header TEI &1 missing in input file. File Rejected |
| ADS2KIPUPL_AL654 |
Part Data Record must start with RTC 12/SEG PNS/CHG .../MFR .../PNR ... |
| ADS2KIPUPL_AL655 |
Invalid Change Code |
| ADS2KIPUPL_AL656 |
Additional (Overflow) Lines should start with PNR .../MFR .../CHG .../... |
| ADS2KIPUPL_AL657 |
&1 repeated in input - Element Rejected |
| ADS2KIPUPL_AL658 |
Unknown TEI &1 encountered - Element Rejected |
| ADS2KIPUPL_AL659 |
Unknown Segment &1 encountered - Segment Rejected |
| ADS2KIPUPL_AL660 |
Segment &1 is incomplete |
| ADS2KIPUPL_AL661 |
UNC is mandatory for non definitive unit of measure &1 |
| ADS2KIPUPL_AL662 |
UNC &1 is erroneous |
| ADS2KIPUPL_AL663 |
File rejected in BADI implemention. TEI &1 Value &2 |
| ADS2KIPUPL_API_AL000 |
************** |
| ADS2KIPUPL_API_AL001 |
Transmission Sequence Number &1 not next in sequence |
| ADS2KIPUPL_API_AL002 |
Transmission File rejected - Sequence Number is blank |
| ADS2KIPUPL_API_AL003 |
Serial Number exceeded permitted range - &1 |
| ADS2KIPUPL_API_AL004 |
Transmission File rejected - RTC value is not &1 for file type &2 |
| ADS2KIPUPL_API_AL005 |
Transmission File rejected as technical checks failed |
| ADS2KIPUPL_API_AL006 |
Transmission Sequence Number &1 should be greater than &2 present in DB |
| ADS2KIPUPL_API_AL007 |
Messages raised out of Customer Extensions. File Rejected |
| ADS2KIPUPL_API_AL071 |
All Price Break: Quantity and Amount are rejected |
| ADS2KIPUPL_API_AL072 |
All Other Charges: Code and Amount are rejected |