| 9J208 |
Activity type &1 not allowed for doc. category &2 in equipment type &3 |
| 9J209 |
Activity type & not allowed for equipment entered |
| 9J210 |
Please enter an equipment for activity type & |
| 9J211 |
Activity type & not allowed for personnel number entered |
| 9J212 |
Please enter a personnel number for activity type & |
| 9J213 |
Activity type & is not allowed for material number entered |
| 9J214 |
You must make an entry for the material for activity type & |
| 9J215 |
Error on saving document entry (&) |
| 9J216 |
Activity type &1 not allowed in document category &2 |
| 9J217 |
Item has already been entered (item &) |
| 9J218 |
Data record is currently locked by user & |
| 9J219 |
Error when undoing lock in table INDX |
| 9J220 |
Document data is incomplete |
| 9J221 |
Items to be copied have not been selected (please check your entries) |
| 9J222 |
Interval upper limit is smaller than lower limit |
| 9J223 |
Shipping document number & does not exist |
| 9J224 |
You do not have to save the data to & |
| 9J225 |
Unit of measure has not been defined |
| 9J226 |
You must make at least two entries from personnel no./recipient/equipment |
| 9J227 |
Function not allowed for item as it has been changed (see: long text) |
| 9J228 |
Loading costs cannot be incurred when you change the activity type |
| 9J229 |
Only the following value(s) are allowed: & & & & |
| 9J230 |
End of measuring point (&1) is before start of measuring point (&2) |
| 9J231 |
Measuring point difference is not equal to performance quantity |
| 9J232 |
Counter reading &1 already entered - measurement document no. &2 |
| 9J233 |
Higher counter reading already entered on & |
| 9J234 |
Counter reading on &1 is smaller than &2 |
| 9J235 |
No entry allowed |
| 9J236 |
Lease settlement cannot be relevant to document entry |
| 9J237 |
Actual and calculated measuring point are identical |
| 9J238 |
Movement category Space (reports) is not allowed here |
| 9J239 |
You cannot make an entry for sender for movement category &1 (&2) |
| 9J240 |
Daily total for &1 &2 &3 &4 is less than 24 hours |
| 9J241 |
Quantity is greater than limit quantity & |
| 9J242 |
You must enter a recipient for movement category &1 (&2) |
| 9J243 |
You must enter a sender for movement category &1 (&2) |
| 9J244 |
You must not make an entry for recipient for movement category &1 (&2) |
| 9J245 |
Sender &3 must be recipient for movement category &1 (&2) |
| 9J246 |
Only values between 1 and 5 are allowed for inventory mgmt type |
| 9J247 |
Only 1 is currently allowed for inventory mgmt type |
| 9J248 |
Equipment item &1 already at recipient &2 |
| 9J249 |
Could not find customer & |
| 9J250 |
Customer &1 must be of type AG (sold-to party) |
| 9J251 |
Item has reference to equipment and cannot be deleted |
| 9J252 |
Please enter a catalog description/code number |
| 9J253 |
Activity type &1 not defined for admin. &2/equi. type &3/doc. category &4 |
| 9J254 |
Could not find equipment & in internal table XEQUI |
| 9J255 |
No relevancy to loading costs |
| 9J256 |
You have not selected any valid items |
| 9J257 |
To-date (&1) is before from-date (&2) |
| 9J258 |
No entry allowed because this is a withdrawal |
| 9J259 |
Value must be smaller than or equal to billing indicator from header (&) |
| 9J260 |
You cannot delete because item &1 has status "&2" |
| 9J261 |
Unit of measure &1 not convertible to unit of measure &2 |
| 9J262 |
Could not find document number &1 item &2 |
| 9J263 |
Provision fee can only be charged for acquisition or shipping |
| 9J264 |
Equipment does not allow provision fee |
| 9J265 |
Inconsistency in EQUZ for equi & |
| 9J266 |
No material number for doc. cat. &/actvty type &/admin. &/equi. type & |
| 9J267 |
Please check header detail data in dominancy price determination |
| 9J268 |
Material number for document category &1/activity type &2 not defined |
| 9J269 |
No authorization own/external indicator &1 and activity type &2. (&3) |
| 9J270 |
You do not have required authorization for movement category "&1". (&2) |
| 9J271 |
No authorization for "&1" and recipient group "&2". (&3) |
| 9J272 |
No authorization for equipment type &1 and activity type &2. (&3) |
| 9J273 |
No authorization for equi. type &1, act. type &2, own/ext. ind. &3. (&4) |
| 9J274 |
Base unit of measure has not been maintained for material & |
| 9J275 |
No authorization for document type &1. (&2) |
| 9J276 |
Equipment item - equi. stock = &2 for sender &1. (&3) |
| 9J277 |
There are only &2 items available at sender &1 on &3. (Item &4) |
| 9J278 |
&1 has been at recipient/activity type &3 since &2. (Document &4) |
| 9J279 |
LIne contains item(s) that have already been posted |
| 9J280 |
Items that have not been posted are deleted |
| 9J281 |
Only &3 or &4 allowed for activity type &1 (settlement ind. &2) |
| 9J282 |
No service provider has been defined for activity type & |
| 9J283 |
Subsequent documents already exist so you cannot change stock |
| 9J284 |
Error in stock check: entry & is missing |
| 9J285 |
No stock for equipment &1 on recipient &2 in period &3 - &4 |
| 9J286 |
Stock check can only be used for document category 1 |
| 9J287 |
No entries for doc. cat. &1 movement cat. &2 in removal sequence table |
| 9J288 |
No & exist for item |
| 9J289 |
There is not enough stock at sender &3 for resource &1 on &2 |
| 9J290 |
No authorization for object J_3GEMPGR2. &/&/&/& |
| 9J291 |
No authorization for object &. &/&/& |
| 9J292 |
Change not allowed for cost senter &1 / controlling area &2 |
| 9J293 |
Cost center/CO area is missing for equipment/sender & |
| 9J294 |
Please check display variant |
| 9J295 |
Display variant not found |
| 9J296 |
Data pool has changed; please recreate variant |
| 9J297 |
Please enter activity type |
| 9J298 |
Please enter unit of measure |
| 9J299 |
Resource & and sender/recipient & are being locked by user & |
| 9J300 |
Profit center not same as for PM order &1 and owner/administrator &2 |
| 9J301 |
Business area not same as for PM order &1 and owner/administrator &2 |
| 9J302 |
Company code not same as for PM order &1 and owner/administrator &2 |
| 9J303 |
Plant not same as for PM order &1 and owner/administrator &2 |
| 9J304 |
Please enter company code |
| 9J305 |
Business area &1 has not been assigned to company code &2 |
| 9J306 |
No catalog assignment made for doc. cat. &1 and activity type &2 |
| 9J307 |
No active BOM exists for equipment &1 in catalog &2 |