| UPF1014 |
Exactly one time characteristic must be made available |
| UPF1015 |
No time characteristic is available |
| UPF1016 |
Could not open dialog |
| UPF1017 |
Choose an optimization variable |
| UPF1018 |
Enter a value that is greater than 0 but less than or equal to 1 |
| UPF1019 |
Lower limit cannot be greater than upper limit |
| UPF102 |
Enter either target currency or characteristic for target currency |
| UPF1020 |
Specify a reference key figure |
| UPF1021 |
Forecasting is being performed for key figure &1 |
| UPF1022 |
Trend value is 0 |
| UPF1023 |
Seasonal index is 0 |
| UPF1024 |
Choose a forecasting strategy |
| UPF1025 |
Enter a weighting group |
| UPF1026 |
Enter the number of periods for each season |
| UPF1027 |
Enter a value greater than 0 |
| UPF1028 |
Enter a value between 0 and 1 |
| UPF1029 |
Value &1 for the historical value figure is not numeric |
| UPF103 |
You can only select a date if the time reference is empty |
| UPF105 |
Select either a fixed key date, the current date, or a characteristic |
| UPF106 |
Enter time base |
| UPF107 |
Enter valid characteristic for the time base |
| UPF108 |
Select appropriate characteristic |
| UPF109 |
Enter valid target key figure |
| UPF110 |
The target currency is already defined |
| UPF111 |
The currency field &1 is invalid |
| UPF112 |
The target unit is predefined |
| UPF113 |
Set either a target unit or a characteristic for a target unit |
| UPF114 |
Enter a valid characteristic for the target unit |
| UPF115 |
Specify exchange rate type |
| UPF116 |
You can only choose the current date when the time reference is empty |
| UPF117 |
The characteristic for determining the translation date is initial |
| UPF118 |
Time reference &1 does not match the planning level characteristics |
| UPF120 |
Target key figure &1 is invalid |
| UPF121 |
From key figure &1 does not exist |
| UPF122 |
Characteristic &1 for the source unit is invalid |
| UPF123 |
The characteristic for the target currency &1 is not valid |
| UPF124 |
A planning sequence with this name already exists |
| UPF125 |
Enter the planning function and the parameter group |
| UPF126 |
Enter the planning area |
| UPF127 |
Enter the planning level |
| UPF128 |
Enter the planning package |
| UPF129 |
You cannot use any variables for this field |
| UPF130 |
Variable must be of type &1 |
| UPF131 |
Processing rules still exist, delete them |
| UPF132 |
Formulas still exist, delete them |
| UPF133 |
An ad hoc parameter group is not planned for this function type |
| UPF134 |
No data available for printing |
| UPF135 |
No hierarchy node input can be used for this field |
| UPF136 |
Select a type for the function |
| UPF137 |
Only variables with a characteristic are allowed to be used here |
| UPF138 |
Characteristic &1 is not available |
| UPF139 |
Also enter variable &1 in characteristic &2 |
| UPF140 |
First delete the selection conditions |
| UPF141 |
You cannot select using attributes for this field |
| UPF142 |
Errors were discovered! Incorrect errors were deleted |
| UPF143 |
Formula error: Type &1 is not allowed for the function |
| UPF144 |
Argument &1 must contain the type of a higher-level characteristic |
| UPF145 |
A comma and other arguments were expected instead of &1 |
| UPF146 |
Function &1 delivers a result of type &2 |
| UPF147 |
Characteristic &1 is not supported |
| UPF148 |
Syntax error: Value 'E'nd or 'S'tart value were expected |
| UPF149 |
Combination time characteristic &1 and parameter &2 is not supported |
| UPF150 |
Syntax error: Date or variable expected |
| UPF151 |
No fields are defined which are derived |
| UPF152 |
Level &1 is unsuitable for the planning function |
| UPF153 |
Error with function &1 access with offset &2 number of values &3 |
| UPF154 |
Incorrect index &1 with function &2 |
| UPF155 |
Check the parameter groups |
| UPF156 |
Check the definition of the planning function |
| UPF157 |
Generation error in program &1 |
| UPF158 |
Characteristic &1 does not exist in planning level &2 |
| UPF159 |
Copying not possible: Method &1 not available |
| UPF160 |
No variables of type F, I or P are allowed as an argument |
| UPF161 |
Only variables or type I or digits are allowed as an argument |
| UPF162 |
Syntax error: Type &2 is not permitted for operator &1 |
| UPF163 |
Error in function TMVL for value &1 and offset &2 |
| UPF164 |
Variable &1 is not of the correct type |
| UPF165 |
Overflow occurred when calculating &1 with value &2 |
| UPF166 |
Formula error; number has to be between 0 and 9 |
| UPF167 |
Overflow when formula is executed |
| UPF168 |
Cannot find function module &1 |
| UPF169 |
Exception: &1 |
| UPF170 |
Formula error; cannot fill parameter &1 |
| UPF171 |
Type &2 of parameter &1 is invalid |
| UPF172 |
Types of parameter &1 (&2) and variable &3(&4) are inconsistent |
| UPF173 |
Length of parameter &1(&2) and variable &3(&4) are inconsistent |
| UPF174 |
Enter function module &1 in table RSPLF_FDIR |
| UPF175 |
Function &1 does not support numeric data types as result |
| UPF200 |
Incorrect formula element: &1 |
| UPF201 |
Formula error: integer expected instead of &1 |
| UPF202 |
Formula error; characteristic name expected |
| UPF203 |
Formula error; &1 characteristic can only be used once |
| UPF250 |
Find partitioning characteristic |
| UPF251 |
Characteristic &1 cannot be used for partitioning |
| UPF252 |
Characteristic &1 has &2 values according to selection condition |
| UPF253 |
&1 is selected as partitioning characteristic (&2 partitions) |
| UPF254 |
No partitioning characteristic available |
| UPF255 |
Selection for &1: &2 |
| UPF301 |
Characteristic &2 (&1) not contained in the characteristics to be checked |
| UPF302 |
Period &1 of 7-place period &2 not equal to &3 |