| UCF2015 |
Value &2 does not exist for E/R determination procedure &1 |
| UCF2016 |
Translation procedure &2 has been used already |
| UCF2017 |
No exchange rate type is assigned to exchange rate indicator &1 |
| UCF2018 |
E/R determination procedure &2 has already been applied |
| UCF2019 |
The assigned rounding method cannot be used |
| UCF2020 |
E/R determination procedure &1: Data stream is not available |
| UCF2021 |
&1 is not within the customer namespace |
| UCF2022 |
Selected item "&1" does not exist |
| UCF2023 |
Document type &2: Selected item "&1" does not exist |
| UCF2024 |
Differing item types in the posting of differences |
| UCF2025 |
Currency translation differences may have an effect on net income |
| UCF2026 |
C/T differences that affect net income require special rounding |
| UCF2027 |
Specify a currency translation method |
| UCF2028 |
Differental assignment is specifically translated |
| UCF2029 |
Exchange rate determ. &1: Values differ in local currency (&2: &3 <> &4) |
| UCF2030 |
E/R determ. &1: Adjustment of differences in group currency (&2: &3) |
| UCF3001 |
Key figure &1 has a difference of &2 in rounding step &3 |
| UCF3002 |
Key figure &1 has a difference of &2 |
| UCF3003 |
Key figure &1 cannot be simultaneously checked and rounded |
| UCF3004 |
Choose at least one key figure |
| UCF3005 |
Method step &1: Difference assignment outside of selection condition |
| UCF3006 |
Selection 2 is defined in the hierarchy above Selection 1 |
| UCF3007 |
Method step &1: Specify a differential accounting object |
| UCF3008 |
Make the settings for the method |
| UCF3009 |
Method step &1: Items in this step do not have the same category |
| UCF4000 |
Program error in reclassification: &1 &2 &3 &4 |
| UCF4001 |
Method step &1: Trigger not complete |
| UCF4002 |
Reclassification completed successfully |
| UCF4003 |
Only a maximum of &2 data entry characteristics may be used |
| UCF4004 |
Method step &1: Condition not complete |
| UCF4005 |
Method step &1: Percentage rate not complete |
| UCF4006 |
Method Step "&1": Trigger key figure needs to be specified |
| UCF4007 |
The method layout does not contain a source or target object |
| UCF4008 |
A method layout without a target object causes a one-sided reclassificat. |
| UCF4009 |
Always use one-sided reclassifications without a document type |
| UCF4010 |
Error in cross-consolidation unit processing |
| UCF4011 |
Method step "&1": Cons group in trigger permitted only with post.level 30 |
| UCF4012 |
Method step "&1": Invalid substitution of &2 with &3 |
| UCF4013 |
Method step "&1": Invalid substitution in the percentage rate |
| UCF5000 |
* Method Maint. IUE: 001 - 099 |
| UCF5001 |
An entry for currency &1 already exists; line removed |
| UCF5002 |
An entry for unit &1 already exists; line removed |
| UCF5003 |
Maximum number of characteristics for fast entry (&1) exceeded (&2) |
| UCF5005 |
Specify selection &3 for method &1 in step &2 |
| UCF5006 |
Define a strategy for posting differences for method &1 in step &2 |
| UCF5007 |
Specify a key figure/attribute for method &1 in step &2 |
| UCF5008 |
Enter missing assignments for other differences for method &1 in step &2 |
| UCF5009 |
Enter missing assignments for currency diffs for method &1 in step &2 |
| UCF5010 |
Do not assign characteristic &1 to component &2 |
| UCF5011 |
Do not assign characteristic &1 to component &2 |
| UCF5012 |
Specify an exchange rate indicator for method &1 |
| UCF5013 |
Define limits for currencies in method &1 |
| UCF5014 |
Define limits for quantities in method &1 |
| UCF5015 |
Enter steps for method &1 |
| UCF5016 |
Selections 1 and 2 partially overlap in method &1, step &2 |
| UCF5017 |
Model does not support values in TC; analysis by TC makes no sense |
| UCF5018 |
Model does not support values in TC; exch.rate ind. makes no sense |
| UCF5100 |
* Execution IUE: 100 - 199 |
| UCF5101 |
No settings were made for the method |
| UCF5102 |
&1 &2 &3 &4 |
| UCF5103 |
Limit exceeded for pair &1, &2 in step &3 (difference of &4) |
| UCF5104 |
Task does not run with transaction currency ("per TC" option reset) |
| UCF5105 |
Task does not run with transaction currency; ignoring exch.rate ind. &1 |
| UCF5106 |
No data found for processing using current selection conditions |
| UCF5107 |
Data model has no trans.crcy; cannot execute reconciliation |
| UCF5108 |
Document type &1 is not intended for automatic postings |
| UCF5109 |
Document type &1 posts with posting level &3, not &2 |
| UCF5110 |
Posting in local currency is not intended |
| UCF5111 |
Document type &1 does not post key figures |
| UCF5112 |
Ignored &1 data records with incomplete consolidation unit assignment |
| UCF5113 |
Ignored &1 data records with incomplete partner unit assignment |
| UCF6000 |
& & & & |
| UCF6001 |
Specification of the treatment of goodwill is required |
| UCF6002 |
Specification of the treatment of negative goodwill is required |
| UCF6003 |
An entry with the same key already exists |
| UCF6004 |
No statistical item is defined for equity item &1 |
| UCF6005 |
No minority interest item specified for equity item &1 |
| UCF6006 |
Data basis: Generate a data stream for goodwill |
| UCF6007 |
No debit item defined for equity item &1 |
| UCF6008 |
Specify a debit item for equity or investment item &1 |
| UCF6009 |
Entries in column "Tot.Eqty" contain errors |
| UCF6010 |
Entries in column "Group Eqty" contain errors |
| UCF6011 |
Entries in column "Min.Eqty" contain errors |
| UCF6012 |
Entries in column "Min.Eqty" contain errors |
| UCF6013 |
Entries in column "Min.Invest" contain errors |
| UCF6014 |
Some required items are not defined for scope &1 |
| UCF6015 |
Goodwill global: All posting items must be specified |
| UCF6016 |
Method settings adjusted to system utilization |
| UCF6017 |
Each C/I activity can only be inserted once |
| UCF6018 |
The stop-here indicator can only be set for one activity |
| UCF6019 |
Activity &1 is not permitted in default sequence |
| UCF6020 |
One or more items for the activity "All Activities" is not specified |
| UCF6021 |
Create number range &1 |
| UCF6022 |
Selected items (master data): "Clearing - Balance Sheet" not specified |
| UCF6023 |
Selected items (master data): "Clearing - Income Statement" not specified |
| UCF6024 |
Selected items (master data): Item &1 is not a balance sheet item |
| UCF6025 |
Selected items (master data): Item &1 is not an income statement item |
| UCF6026 |
Item &1: Variance between equity data and totals data |
| UCF6027 |
Item &1: Variance between equity data and totals data |
| UCF6028 |
Data origin investment data: Item &1 is not a balance sheet item |