| UCD1021 |
Wrong value at automatic posting item &1 |
| UCD1022 |
&1 &2 is not defined |
| UCD1023 |
&1 &2 not defined for independent characteristic &3 |
| UCD1024 |
&1 &2 not defined for independent characteristics &3 |
| UCD1025 |
Invalid breakdown of &3 &4 by &1: Initializing the value |
| UCD1026 |
Breakdown &3 &4 by &1: Value filled with default from breakdown category |
| UCD1027 |
Breakdown &4 by &1: Value replaced by default value |
| UCD1028 |
Breakdown &3 &4 by &1: Default value inserted |
| UCD1029 |
&1 not filled |
| UCD1030 |
Breakdown &3 &4 by &1: Default value inserted |
| UCD1031 |
&1 &2 not defined for posting to &3 &4 |
| UCD1032 |
&1 of &2 is not correct |
| UCD1033 |
Automatic posting item "Clearing - Balance Sheet" is not defined |
| UCD1034 |
Automatic posting item "Clearing - Income Statement" is not defined |
| UCD1035 |
Number range not defined for &1 &2 |
| UCD1036 |
&1 is not correct |
| UCD1037 |
Internal error during processing |
| UCD1038 |
Maximum selection does not contain value &1 of subassignment &2 |
| UCD1039 |
Posting not possible to &1 in period &2, fiscal year &3 |
| UCD1040 |
Cannot permit a non-initialized value &1 for group char. &2 at PL &3 |
| UCD1041 |
Initialized value not permitted for group char. &1 at posting level &2 |
| UCD1042 |
Automatic posting item is missing for "Deferred Taxes - Balance Sheet" |
| UCD1043 |
Automatic posting item is missing for "Deferred Taxes - Income Statement" |
| UCD1044 |
It is not possible to post to hierarchy node &1 &2 |
| UCD1045 |
Document type &1: Clearing item for cons units has not been maintained |
| UCD1046 |
&1 &2 is not valid |
| UCD1047 |
&1 &2 is not valid for independent characteristic &3 |
| UCD1048 |
&1 &2 is not valid for independent characteristics &3 |
| UCD1049 |
Default value &1 does not exist for &2 |
| UCD1050 |
&1 is not fixed with a constant value |
| UCD1051 |
&1 not filled |
| UCD1052 |
&1 not filled |
| UCD1053 |
Item &1 is not a balance sheet item |
| UCD1054 |
Initializing key figure &1 |
| UCD1055 |
Entry of &1 is invalid; value will be initialized |
| UCD1056 |
A value for &1 is required |
| UCD1057 |
Direction indicator for elimination of investment income is blank |
| UCD1058 |
Document type &1: Automatic clearing item &2 does not exist |
| UCF0000 |
Method &1 |
| UCF0001 |
Consolidation method &1 does not exist |
| UCF0002 |
Layout &1 does not exist |
| UCF0003 |
Consolidation method &1 already exists |
| UCF0004 |
Layout &1 already exists |
| UCF0005 |
&3: Selection conditions overlap |
| UCF0006 |
Consolidation method &1 is not defined |
| UCF0007 |
Cons method &1 only contains empty steps |
| UCF0008 |
Globally-defined characteristic &2 may not be used in &1 |
| UCF0009 |
Permanent parameters saved for consolidation area &1 |
| UCF0010 |
&1 / &2: Char. &3 no longer available |
| UCF0011 |
&1 / &2: Char. &3 not yet available |
| UCF0012 |
&1 / &2: Added restriction for char. &3 |
| UCF0013 |
Several method steps have the same name |
| UCF0014 |
Values fixed in the consolidation area are invalid |
| UCF0015 |
Values in permanent parameters are invalid |
| UCF0016 |
Consolidation method has no steps |
| UCF0017 |
Transferring name suggestions for method steps |
| UCF0018 |
Layout for method &1 does not exist |
| UCF0019 |
Deleting invalid method step "&1" |
| UCF0020 |
Consolidation method is invalid |
| UCF0021 |
Method layout is invalid |
| UCF0022 |
Purging redundant inheritance information |
| UCF0500 |
***************** Messages for Equity Services ************************ |
| UCF0501 |
Investment item under 'Clearing - Cons Unit' has not been specified |
| UCF0502 |
Investment item under scope &1 has not been specified |
| UCF0503 |
Consolidation unit &1 has no upper units |
| UCF0504 |
Effective group share equals zero |
| UCF0505 |
There is no scope of reported data that affects earnings |
| UCF0506 |
Scope of reported data has not been defined for item &1 |
| UCF0507 |
Offsetting item for scope &1 has not been specified |
| UCF0508 |
Consolidation of investments is not activated |
| UCF0509 |
Mutual stock method is not supported |
| UCF1000 |
Program error in allocation: &1 &2 &3 &4 |
| UCF1001 |
Method step &1: Trigger not complete |
| UCF1002 |
Method step &1: Distribution key is not complete |
| UCF1003 |
Entries for the allocation are contradictory |
| UCF1004 |
The allocation ran successfully |
| UCF1005 |
Method step &1: Check your customizing (iteration problem) |
| UCF1006 |
Only a maximum of &2 'per sender' characteristics can be used |
| UCF1007 |
Only a maximum of &2 data entry characteristics can be used |
| UCF1008 |
A sender object exists in more than one step |
| UCF1009 |
Method step &1: Distribution characteristic is required |
| UCF1010 |
Method step &1: No distribution data |
| UCF1011 |
Only a maximum of &2 data entry characteristics may be used |
| UCF1012 |
Allocation cannot be executed on posting level &1 |
| UCF1013 |
Method step "&1": Trigger key figure needs to be specified |
| UCF2000 |
Currency translation: &1 &2 &3 &4 |
| UCF2001 |
Source currency is not specified |
| UCF2002 |
Target currency is not specified |
| UCF2003 |
Currency key &1 does not exist |
| UCF2004 |
Translation key &1 does not exist |
| UCF2005 |
Translation timeframe &1 does not exist |
| UCF2006 |
Translation procedure &1 is unknown |
| UCF2007 |
Exchange rate period used (&1) does not exist |
| UCF2008 |
Rate determination procedure &1 is unknown |
| UCF2009 |
Disclosure of temporal translation differences is not possible |
| UCF2010 |
Source or target key figure is not specified |
| UCF2011 |
Exchange rate determination is not specified |
| UCF2012 |
Currency translation key is not specified |
| UCF2013 |
Reference translation is not taking place |
| UCF2014 |
No currency translation differences reported |