| SPC02812 |
Material & not present in the PO & |
| SPC02813 |
Sales Order & does not contain any confirmed quantity |
| SPC02814 |
Unit '&' from the IDoc differs from unit '&' from Purchase Order '&' |
| SPC02815 |
No price in inforecord '&' for material '&' and vendor '&' |
| SPC02816 |
Purchasing document '&' item '&' cannot be identified |
| SPC02817 |
MPN & cannot be identified for the part number in the inquiry |
| SPC02818 |
Document currency '&' differs from condition currency '&'. |
| SPC02819 |
Condition currency '&' differs from scales currency '&'. |
| SPC02820 |
Invoice receipt & exists - change to purchase order & & not allowed |
| SPC02821 |
Invoice already exists for the parameters mentioned in the flat file |
| SPC02822 |
No SPEC2000 relevant Purchase Order changes were made |
| SPC02823 |
Material change not possible.IPN '&1' not same as partnumber '&2' in RFQ |
| SPC02824 |
Shipping notification & exists - material change to PO & & not allowed |
| SPC02825 |
Goods receipt & exists - material change to PO & & not allowed |
| SPCM01000 |
not explicite S2KM-idoc error |
| SPCM01001 |
Message &1 with Code &2 and Fun. &3 not defined in table SPCMPORTFUN |
| SPCM01003 |
Partner profile for the message &1 is not set with EDISTD as 'A' |
| SPCM01100 |
No change found against &1 (Idoc: &2) |
| SPCM01101 |
Document locked ( Waiting Replay &1 ) |
| SPCM01102 |
Error in creating S2KM-message (Idoc: &1 ) |
| SPCM01103 |
Error build S_3 : Corr. S_1 not found |
| SPCM01104 |
Error build SA2: req. QTY - conf. QTY = &1 |
| SPCM01105 |
Document locked; but overruled with UNLOCK |
| SPCM01106 |
Filter failed, no EDP01 - segment in Idoc |
| SPCM01200 |
Corresponding &1 not found (docnumber: &2) |
| SPCM01201 |
Error in writing S2KM-data in table &1 (after receive &2) |
| SPCM01202 |
Error during insert of &1 |
| SPCM01203 |
No corresponding Idoc is linked to Document |
| SPCM01204 |
SA3 rejection posted (PO:&1 Item:&2) |
| SPCM01205 |
ANSWER message created in IDoc &1 |
| SPCM01206 |
error while creating answer message |
| SPCM01300 |
No TEI found in SPCMCOMP for data set '&' |
| SPCM01500 |
Error while creating flatfile. For explanation see messages before. |
| SPCM01501 |
Error while creating SPEC2k Idoc. For explanation see messages before. |
| SPCM01502 |
Flatfile was saved in: & & |
| SPCM01503 |
Tables 'SPCMFILE' and 'SPCMDTEL' are not consistent. |
| SPCM01504 |
No entries in table SPCMFILE for key MESTYP '&' MESFCT '&' MESCOD '&'. |
| SPCM01600 |
Value for '&' in segment '&' not allowed ('&'). |
| SPCM01601 |
Mandatory field check failed for field '&' in segment '&'. |
| SPCM01602 |
SPEC 2000-IDoc and SPEC 2000-Flatfile structure are not consistent. |
| SPCM01603 |
Related fields not maintained: '&' (&) --> '&' (&). |
| SPCM01604 |
Type violation in field '&' in segment number '&'. |
| SPCM01605 |
Decimal places violation in field '&' in segment number '&'. |
| SPCM01606 |
Minimum/maximum length violation in field '&' in segment '&' ('&'). |
| SPCM01607 |
obsolete: now in 503 |
| SPCM01608 |
obsolete: now in 504 |
| SPCM01609 |
Unable to identify message function. |
| SPCM01610 |
Field '&' should not occur in message type '&' message function '&'. |
| SPCM01611 |
Structure of inbound SPEC 2000-Flatfile is not valid. |
| SPCM01613 |
Receiver/sender address information missing in SPEC 2000-message header |
| SPCM01614 |
Partner profile not maintained in table 'SPCMPRTNRINF' for rcvr & sndr & |
| SPCM01615 |
Rcvr/sndr not maintained in table 'SPCMPRTNRINF' for given partnr profile |
| SPCM01616 |
No entries found in table 'IDOCSYN' for IDOCTYP '&' |
| SPCM01650 |
File '&' could not be opened for output |
| SPCM01651 |
Port '&' could not be opened for output |
| SPCPC000 |
You are not authorized to use Transaction PAL |
| SPCPC001 |
PAL application could not be started |
| SPC_PROD000 |
Exception happened |
| SPC_PROD001 |
Resource bundle &1 is not readable |
| SPC_PROD002 |
Problem to retrieve data for the product Guid &1 and data Model &2 |
| SPC_PROD003 |
Object family is missing for productGUID &1, productID &2, producType &3 |
| SPC_PROD004 |
Problem to retrieve data for the product ID &1 and product Type &3 |
| SPC_PROD005 |
Problem to retrieve the &1 for the product GUID &2, hierarchy GUID &3 |
| SPC_PROD006 |
Problem to retrieve data for the product GUID &1 fragment Type ID &2 |
| SPC_PROD007 |
Unable to get the Product Description for the product GUID &1 |
| SPC_PROD008 |
Unable to retrieve data for the product GUID &1, fragment Type ID &2 |
| SPC_PROD009 |
Unable to retrieve the Product Numbering Scheme for the scheme GUID &1 |
| SPC_PROD010 |
Unable to retrieve the Product Set Type for the fragment Type ID &1 |
| SPC_PROD011 |
Error with the Cache Region instantiation for the region named &1 |
| SPC_PROD012 |
Product ID 'ZERO' is not permitted |
| SPC_PROD013 |
Unable to retrieve the Product Set Type for the Type &1 |
| SPC_PROD014 |
Unable to retrieve the Product Unit for the product Guid &1 |
| SPC_PROD015 |
Unable to retrieve the Product Category Hierarchy for the Guid &1 |
| SPE000 |
Manual change not permitted: Price unit set to zero. |
| SPE001 |
Buffer synchronization begun. |
| SPE002 |
Buffer synchronization completed. |
| SPE003 |
Session for RFC destination '&' could not be opened. |
| SPE004 |
&1&2&3&4 |
| SPE005 |
Condition record &1 inconsistent - cannot be buffered (key field &2 miss) |
| SPE006 |
No connection could be made to IPC |
| SPE007 |
Error when calling up IPC (RFC destination &1) |
| SPE014 |
Material &1, condition &2 : unit of measure &3 is not allowed |
| SPE205 |
Condition & cannot be processed manually |
| SPE206 |
Condition &1 is missing in pricing procedure &2 &3 &4 |
| SPE208 |
Condition &1: Error in converting exchange rate from &2 to &3 |
| SPE209 |
Pricing procedure &1 is empty (does not contain any lines) |
| SPE213 |
Condition & is not allowed as header condition |
| SPE214 |
Condition & is not allowed as item condition |
| SPE226 |
Condition & cannot be deleted |
| SPE230 |
Condition &1 may not be changed due to fixation group &2 |
| SPE231 |
Condition &1 may not be deleted due to fixation group &2 |
| SPE232 |
Condition &1 may not be copied because of fixation group &2 |
| SPE250 |
Unit & is not valid for condition type & |
| SPE300 |
External document &1 is not known |
| SPE305 |
External document &1 exists already |
| SPE310 |
Item &1 of external document is not known |
| SPE315 |
Item &1 of external document already exists |
| SPE501 |
Rounding unit & not permitted. |
| SPE502 |
Item &1: Higher-level item &2 not valid. |
| SPE503 |
Item &1: Exchange rate data &2 not valid. |