| RSUOM079 |
The data object contains no key figure column of type unit |
| RSUOM080 |
Parameter row &1; source key figure is initial |
| RSUOM081 |
Parameter row &1; target key figure is initial |
| RSUOM082 |
Parameter row &1; quantity conversion type is initial |
| RSUOM083 |
Parameter row &1; source key figure &2 is not contained in data object |
| RSUOM084 |
Parameter row &1: Source key figure is not of type QUAN |
| RSUOM085 |
Parameter row &1; target key figure &2 not contained in data object |
| RSUOM086 |
Parameter row &1: Target key figure is not of type QUAN |
| RSUOM087 |
Parameter row &1; source and target key figure have to be different |
| RSUOM088 |
Parameter row &1: Quantity conversion type &2 does not exist |
| RSUOM089 |
Cannot use this quantity conversion type |
| RSUOM090 |
Internal error: CREATE DATA - &1 &2 |
| RSUOM091 |
Internal error: ASSIGN - &1 &2 |
| RSUOM092 |
Key figure &1 has no quantity |
| RSUOM093 |
------------------------------------------------------------------------- |
| RSUOM094 |
Data record: &1, quantity conversion type &2 |
| RSUOM095 |
The target quantity of &1 has a fixed default: &2 |
| RSUOM096 |
There was an attempt to convert to target quantity &1 |
| RSUOM097 |
Key figure &1 -> key figure &2 |
| RSUOM098 |
&1 &2 -> &3 &4 |
| RSUOM099 |
Conversion: &1 <-> &2 |
| RSUOM100 |
Buffering: &1 |
| RSUOM101 |
Determined base unit of measure: &1 |
| RSUOM102 |
Single-step conversion of &1 to &2 |
| RSUOM103 |
Two-step conversion of &1 to &2 using base unit of measure &3 |
| RSUOM104 |
Conversion factors: Counter - &1, Denominator - &2 |
| RSUOM105 |
Conversion: T006 |
| RSUOM106 |
Conversion: InfoObject specific |
| RSUOM107 |
Cannot find appropriate InfoObject |
| RSUOM108 |
SID &1 for quantity 0UNIT unknown |
| RSUOM109 |
The variable &1 is not permitted for the target currency |
| RSUOM110 |
No 'Quantity units of measure for the characteristic' for charac. &1 |
| RSUOM111 |
Are there conversion factors for each characteristic value? |
| RSUOM112 |
Does a master record exist for all conversion factors? |
| RSUOM113 |
No active version exists for table &1 |
| RSUOM114 |
Internal error: CREATE DATE FAILED - &1 &2 &3 &4 |
| RSUOM115 |
Internal error: ASSIGN - &1 &2 &3 &4 |
| RSUOM116 |
Empty base unit of measure found in &1 |
| RSUOM117 |
Internal error: &1 &2 &3 &4 |
| RSUOM118 |
&1. No identical base unit of measure between character. and DataStore |
| RSUOM119 |
Characteristic: &1, quantity DataStore object: &2 |
| RSUOM120 |
Examined number of data records: &1 |
| RSUOM121 |
1st Test - Are there conversion factors for each characteristic value? |
| RSUOM122 |
2nd Test - Is there a master record for all conversion factors? |
| RSUOM123 |
Characteristic value: &1 &2 &3 &4 |
| RSUOM124 |
with errors: &1 |
| RSUOM125 |
&1. No conversion factors found for the characteristic value: |
| RSUOM126 |
Result: |
| RSUOM127 |
There are factors, but no master record in &1 for the following value |
| RSUOM128 |
with warning: &1 |
| RSUOM129 |
Check consistency of base unit of measure between &1 and &2 |
| RSUOM130 |
No automatic repair possible |
| RSUOM131 |
Specify a valid InfoSet |
| RSUOM132 |
First specify an InfoSet |
| RSUOM133 |
Choose an appropriate InfoObject using F4 help |
| RSUOM134 |
No suitable object found |
| RSUOM135 |
Between DataStore &1 and characteristic &2 |
| RSUOM136 |
Expected base unit of measure according to master data record: &1 |
| RSUOM137 |
&2. Empty base unit of measure found in &1 |
| RSUOM138 |
&1. No corresponding base units of measure |
| RSUOM139 |
The following characteristic value will be deleted: |
| RSUOM140 |
Repair complete |
| RSUOM141 |
with errors: &1 |
| RSUOM142 |
Source unit of measure: Enter unit of measure |
| RSUOM143 |
Source unit of measure: Enter variable |
| RSUOM144 |
Target unit of measure: Enter variable |
| RSUOM145 |
You only have display authorization for quantity conversion type &1 |
| RSUOM146 |
You have no authorization for quantity conversion type &1 |
| RSUOM147 |
Internal error during authorization check for quantity conversion type &1 |
| RSUOM148 |
Error occurred when displaying the documentation |
| RSUOM149 |
Error when writing quantity conversion type &1 to database (&2) |
| RSUOM150 |
Checks consistency of base unit of measure between charac. &1 and DS &2 |
| RSUOM151 |
No F1 help available |
| RSUOM152 |
Target unit of measure: Enter InfoSet and InfoObject/field alias |
| RSUOM153 |
Error during SID determination for unit of measure &1 |
| RSUOM155 |
Column: &1 |
| RSUOM156 |
Table: &1 |
| RSUOM157 |
Where Condition: |
| RSUOM158 |
Object &1 &2 is not allowed to be saved/deleted |
| RSUOM159 |
Characteristic &1, Characteristic Value &2 |
| RSUOM160 |
Maximum Number of Messages (&1) Exceeded |
| RSUOM161 |
Secondary index created on SID columns (table &1) |
| RSUOM162 |
Secondary index deleted on SID columns (table &1) |
| RSUOM163 |
Secondary index activated on SID columns (table &1) |
| RSUOM164 |
&1 is not a quantity DataStore object |
| RSUQ100 |
Specify the name of an InfoSource |
| RSUQ101 |
InfoSource & already exists |
| RSUQ102 |
InfoSource & does not exist |
| RSUQ103 |
No InfoSource specified |
| RSUQ104 |
InfoSource & cannot be maintained with SAP query |
| RSUQ105 |
Fields from parallel branches of the structure used in functional area |
| RSUQ106 |
Stucture & cannot be deleted |
| RSUQ120 |
Specify the name of a functional area |
| RSUQ121 |
Functional area & is not available in global area |
| RSUQ122 |
Functional area & cannot be used |
| RSUQ123 |
No functional area has been assigned to Infosource & yet |
| RSUQ124 |
Query could not be deleted |
| RSUQ125 |
Structure is still being used - deletion not possible |
| RSUQ126 |
Functional area & is not available in standard area |
| RSUQ128 |
InfoSource has not yet been created |