| RSPLF119 |
Variable &1 invalid; only single values are permitted |
| RSPLF120 |
Only single values are permitted |
| RSPLF121 |
Hierarchy node '&1'/'&2' does not exist |
| RSPLF122 |
Hierarchy node '&1'/'&2' does not contain values from characteristic &3 |
| RSPLF123 |
InfoObject &1 is not active |
| RSPLF124 |
Variable &1 is not available in an active version |
| RSPLF125 |
Value '&1' from the &2 InfoObject is in an invalid format |
| RSPLF126 |
Value '&1' from the &2 characteristic is not valid |
| RSPLF127 |
Planning function & 1 does not exist |
| RSPLF128 |
Errors when reading filter |
| RSPLF129 |
Error when reading planning function &1 |
| RSPLF130 |
Errors found in parameters for condition &1: |
| RSPLF131 |
Function cannot be applied to MultiProviders |
| RSPLF132 |
You are not authorized to read the data |
| RSPLF133 |
You are not authorized to change planning function &1 |
| RSPLF134 |
Variable &1 invalid; can only be replaced with variables |
| RSPLF135 |
Variable &1 is not valid; type is incorrect |
| RSPLF136 |
Information about hierarchy was expected: &1 |
| RSPLF137 |
Hierarchy node variables in formulas must use identical hierarchies |
| RSPLF138 |
Hierarchy &1 for InfoObject &2 not found |
| RSPLF139 |
Error converting hierarchy for InfoObject &1 |
| RSPLF140 |
Selection of the filter describes the empty set |
| RSPLF150 |
--------- Messages for Planning Function Types ------------------------- |
| RSPLF151 |
Function type '&1' is not available in an active version |
| RSPLF152 |
Function type '&1' does not exist |
| RSPLF153 |
Function type '&1' is not available in &2 version |
| RSPLF154 |
Function type '&1' is not locked |
| RSPLF155 |
Function type '&1' reset to active version |
| RSPLF156 |
Error resetting function type '&1' to active version |
| RSPLF157 |
Function type '&1' locked by Change and Transport Organizer |
| RSPLF158 |
Error in parameter &1: &2 InfoObject is not active |
| RSPLF159 |
No InfoObject specified for parameter &1 |
| RSPLF160 |
Error in parameter &1: Data element '&2' is invalid |
| RSPLF161 |
Error in parameter &1: Default value '&2' is not permitted |
| RSPLF162 |
Error in parameter &1: Parameter type '&2' is invalid |
| RSPLF163 |
Structured parameter '&1' does not have any components |
| RSPLF164 |
Enter name of function type |
| RSPLF165 |
Function type '&' to be deleted by transport (delete only allowed) |
| RSPLF166 |
Function type '&1' is locked by user '&2'; display only possible |
| RSPLF167 |
Function type '&1' is locked; display only possible |
| RSPLF168 |
Function type '&1' already exists |
| RSPLF169 |
Function type '&1' activated |
| RSPLF170 |
You are not authorized to change function type '&1' |
| RSPLF171 |
Error while activating function type '&1' |
| RSPLF172 |
You do not have authorization to create function type &1 |
| RSPLF173 |
You do not have authorization to display function type &1 |
| RSPLF174 |
Function type &1 has no errors |
| RSPLF175 |
Parameter name &1 contains non-alphanumeric characters |
| RSPLF176 |
Enter a parameter name |
| RSPLF177 |
Highlight the parameter that you want to move |
| RSPLF178 |
Parameter &1 cannot be moved |
| RSPLF179 |
Function type &1 saved |
| RSPLF180 |
No ABAP class specifed for function type &1 |
| RSPLF181 |
Object status of function type &1 set to inactive |
| RSPLF182 |
Function type &1 deleted |
| RSPLF190 |
Interface method called in wrong context |
| RSPLF191 |
Error in planning function type &1; parameter &2 does not exist |
| RSPLF192 |
Program error in function type &1; type conflict in parameter &2 |
| RSPLF200 |
--------- Messages for RFC Serialisation ------------------------------- |
| RSPLF201 |
Conversion problem for value: &1, and InfoObject: &2. Show default |
| RSPLF202 |
Cannot convert default value '&3' for parameter &1(&2) |
| RSPLF203 |
Conversion problem for value: &1, and InfoObject: &2. Rows omitted |
| RSPLF204 |
Cannot read variable &1; reset the value |
| RSPLF205 |
Error while reading variable &1: Conversion with Sy-date |
| RSPLF220 |
Program error: Field &1 is not an attribute of InfoProvider &2 |
| RSPLF300 |
---- Further messages for planning functions ---- |
| RSPLF301 |
Context information for the other messages |
| RSPLF302 |
Selection for characteristic &1: Single value &2 |
| RSPLF303 |
Selection for characteristic &1: From &2 to &3 |
| RSPLF304 |
No reference data exists; data has not been distributed |
| RSPLF305 |
Distributed equally to combinations available in the transaction data |
| RSPLF306 |
No transaction data; Distributed equally to permitted combinations |
| RSPLF307 |
No default possible; No transaction data; No combinations permitted |
| RSPLF308 |
Error while generating combinations |
| RSPLF309 |
To-value &1 for sub-process &2 produces following errors |
| RSPLF310 |
After-value restriction &1 for sub-process &2 produces following errors |
| RSPLF311 |
Cannot find reference data for sub-process &1 of the function |
| RSPLF312 |
Corresponding data has not been distributed |
| RSPLF313 |
Reference data with total zero. Key figure &1 in subprocess &2 |
| RSPLF314 |
Reference data with non-unique +/- sign. Key figure &1, subprocess &2 |
| RSPLF315 |
Create at least one distribution process |
| RSPLF316 |
Factors for subprocess &1 result in total 0 |
| RSPLF317 |
Factors for subprocess &1 have different +/- signs |
| RSPLF318 |
Select at least one key figure |
| RSPLF320 |
---- Messages for forecasting planning function type ---- |
| RSPLF321 |
Select a time characteristic |
| RSPLF322 |
Characteristic &1 is not a time characteristic |
| RSPLF323 |
Choose a forecast strategy |
| RSPLF324 |
Forecast strategie &1 is not valid |
| RSPLF325 |
Specify a time frame for the forecast |
| RSPLF326 |
Specify a historic time frame |
| RSPLF327 |
For the sequence, enter a value greater than or equal to 1 |
| RSPLF328 |
Enter at least one weighting factor |
| RSPLF329 |
Enter a value greater than or equal to 0 |
| RSPLF330 |
Enter a value greater 0 |
| RSPLF331 |
Method &1 for correcting outliers is not valid |
| RSPLF332 |
Restrict characteristic &1 to a single value |
| RSPLF333 |
Select a time characteristic and its higher-level characteristics |
| RSPLF334 |
At least one weighting factor has to be greater than 0 |
| RSPLF335 |
Enter a value that is lesser than or equal to 1 |