| RSDD111 |
Aggregate &1 is condensed to 0REQUID <= &2 and 0CNSID <= &3 |
| RSDD112 |
Aggregate &1(&2) is being filled |
| RSDD113 |
Aggregate &1(&2) is rolled up to &3 |
| RSDD114 |
Aggregate &1(&2) is being adapted / rebuilt |
| RSDD115 |
&1 aggregates are condensed |
| RSDD116 |
Hierarchy &1 is not included in change run |
| RSDD117 |
Characteristic &1 is not included in change run |
| RSDD118 |
Restarting canceled change run with ID &1... |
| RSDD120 |
Aggregate &1 rebuilt in &2 seconds |
| RSDD121 |
Aggregate &1 rolled up in &2 seconds |
| RSDD122 |
Aggregate &1 adjusted in &2 seconds in the Change Run |
| RSDD123 |
Aggregate &1 adjusted in &2 seconds when deleting data |
| RSDD124 |
Attribute &1 for basic characteristic &2: &3 changes |
| RSDD125 |
Hierarchy &1 for characteristic &2: &3 changes in level &4 |
| RSDD126 |
Error in aggregate table for InfoCube &1 |
| RSDD127 |
Error with truncate from table &1 |
| RSDD128 |
Rollup for InfoCube &1 not possible. There are no aggregates |
| RSDD130 |
The &3 table from the source was divided into &2 blocks with char. &1 |
| RSDD131 |
Characteristics and hierarchies affected by change run |
| RSDD132 |
&1 aggregates will be adjusted |
| RSDD133 |
BIA indexes will be adjusted |
| RSDD134 |
Master data of &1 characteristics and &2 hierarchies will be activated |
| RSDD135 |
Aggregates will be checked |
| RSDD136 |
ID for change run: &1 |
| RSDD140 |
Aggregate &1: Preperations for filling |
| RSDD141 |
&1 minutes waiting time was required for locks |
| RSDD142 |
Aggregate &1: Read: Block characteristic &2 range: &3 - &4 |
| RSDD143 |
Aggregate &1: Read (&2) from table &3 (max &4 records) |
| RSDD144 |
Aggregate &1: Write (&2) (&3 records) |
| RSDD145 |
Aggregate &1: Read from &2 and write directly to the database |
| RSDD146 |
Aggregate &1: Repair indexes |
| RSDD147 |
Aggregate &1: Analyze database tables |
| RSDD148 |
Error while writing to the fact table. Data save in &1 |
| RSDD199 |
Invalid program status with the update of the aggregates |
| RSDD200 |
<<<<< Messages 200-299 reserved for data manager read interfaces >>>> |
| RSDD201 |
InfoProvider contains too many characteristics; make a preselection |
| RSDD202 |
Specify a report name |
| RSDD203 |
Select at least one characteristic or one key figure |
| RSDD299 |
Invalid program status in data manager - read interface |
| RSDD300 |
<<<< Messages 300-399 reserved for aggregates, general messages >>> |
| RSDD301 |
Reading from aggregate &3 not possible due to block by user &1 |
| RSDD302 |
Writing to aggregate &3 not possible due to block by user &1 |
| RSDD303 |
Maintenance of aggregate &3 not possible due to block by user &1 |
| RSDD304 |
Creation of aggregates for InfoCube & not possible. |
| RSDD305 |
The RFC group &1 can have a maximum of &2 work processes |
| RSDD306 |
Replacing variable &1 with value &2 (InfoCube = &3) |
| RSDD310 |
Aggregate &1, version &2 could not be deleted (error &3) |
| RSDD311 |
No SID for fixed value '&3', InfoObject '&2' for aggregate '&1' (&4) |
| RSDD312 |
No SID for hierarchy '&3', InfoObject '&2' of aggregate '&1' (&4) |
| RSDD313 |
Hierarchy &1 of InfoObject &2 (aggregate &3) does not exist |
| RSDD314 |
Aggregation level "*" has been set for char. '&1' (aggregate '&3') |
| RSDD350 |
Activation of hierarchy &1; background job &2; start time &3 |
| RSDD351 |
Activation of master data of &1; background job &2; start time &3 |
| RSDD352 |
Activation of master data of &1 in main process |
| RSDD353 |
Error while processing aggregate &1 |
| RSDD354 |
Error while activating characteristic &1 |
| RSDD355 |
Error while activating hierarchy &1 (&2) |
| RSDD400 |
'&2': No hierarchy, level or value may be entered for &1 |
| RSDD401 |
'&2': You have to specify a hierarchy and a level for characteristic &1 |
| RSDD402 |
'&2': No value may be specified for characteristic &1 |
| RSDD403 |
'&2': You have to specify a value for characteristic &1 |
| RSDD404 |
'&2': Do not specify a hierarchy or a level for characteristic &1 |
| RSDD405 |
Aggregate ID & has already been entered for this InfoCube. |
| RSDD406 |
Active version maintenance not allowed. Display only |
| RSDD407 |
Aggregate &1 was successfully created as AggregateCube &2 |
| RSDD408 |
Save your entries before activation |
| RSDD409 |
Maintenance not possible as SE16 maintenance is allowed |
| RSDD410 |
'&2': Characteristic &1 must have aggregation level '*' or 'F' |
| RSDD411 |
No hierarchy found for the InfoObject |
| RSDD412 |
'&3': Compound characteristic &1 must also have aggregation level &2 |
| RSDD413 |
'&2': Characteristic &1 contains fixed values that are not allowed |
| RSDD414 |
'&2': No hierarchy allowed for InfoObject &1 |
| RSDD415 |
Aggregation using time-dependent hierarchy &3 is not allowed (&1, &2) |
| RSDD416 |
Have to summarize using time-dependent attribute '&1' in '&2' |
| RSDD417 |
Hierarchy name is incorrect. |
| RSDD418 |
Error when compiling the hierarchy ID. |
| RSDD419 |
Error When Checking Aggregate & |
| RSDD420 |
'&3': Key figure &1 requires '*' for characteristic &2 |
| RSDD421 |
'&3': Aggregation level '%' is not allowed for characteristic &1 |
| RSDD422 |
'&3':Aggregation level '&1' for characteristic '&2', aggregate is invalid |
| RSDD423 |
'&3': Specify aggregation level '*' for characteristic &1 or attribute &2 |
| RSDD424 |
Check of aggregate & without errors and warnings |
| RSDD425 |
Aggregates successfully saved. |
| RSDD426 |
'&3': '&2' cannot be in aggregate because of characteristic '&1' |
| RSDD427 |
Aggregate name & already exists. Please select another. |
| RSDD428 |
No F4 help available |
| RSDD429 |
'&2': InfoCube '&1' contains non-cumulatives: Time char &3 not summarized |
| RSDD430 |
'&2': InfoCube '&1 contains non-cumulatives: Ref. char. &3 not summarized |
| RSDD431 |
'&2': Line item '&1' is used in aggregate |
| RSDD432 |
'&2': Hierarchy level '&3' for characteristic '&1' is greater than '&4' |
| RSDD433 |
'&3': Characteristic '&2' also transferred as compounded with '&1' |
| RSDD434 |
'&3': Chara. '&2' transferred because of exception aggregation for '&1' |
| RSDD435 |
'&1': Aggregate is defined correctly |
| RSDD436 |
'&3': InfoCube &1 contains non-cumulatives: Time characteristic &2 added |
| RSDD437 |
'&3': InfoCube &1 contains non-cumulatives: Time characteristic &2 added |
| RSDD438 |
'&1': Aggregate has a variable key date. Schedule process "&2" |
| RSDD439 |
'&1': Aggregate has a variable key date. Activate process chain '&2'. |
| RSDD440 |
'&1': The variable for the filled aggregate cannot be changed |
| RSDD441 |
'&2': Aggregation level for '&1' set as '*', as specified in InfoCube |
| RSDD442 |
'&2': Characteristic &1 already specified in InfoCube |