| RSCUR079 |
Only integer positive or negative values are allowed |
| RSCUR080 |
Conflict: Determination of source currency (translation type &1) |
| RSCUR082 |
The type of currency translation contains errors |
| RSCV000 |
------------------------------------------------------------------------- |
| RSCV001 |
& & & |
| RSCV009 |
Generation no longer possible. Start the transaction anew |
| RSCV010 |
Without errors and warnings |
| RSCV011 |
Disallowed entry for function module |
| RSCV012 |
Other eror & & & & |
| RSCV013 |
No results available. |
| RSCV014 |
No long text exists for message no. & in class & |
| RSCV015 |
Message &1 in class &2 of type &3 not found in language &4 |
| RSCV016 |
Please select a function module |
| RSCV017 |
No initialized languages found |
| RSCV018 |
System language for installed languages not found |
| RSCV020 |
InfoCube & was not found. |
| RSCV021 |
Error when reading the InfoCatalog of InfoCube &. |
| RSCV022 |
InfoObject & was not found in the InfoCube & |
| RSCV023 |
Table names could not be determined from InfoObject &. |
| RSCV024 |
Invalid entry & InfoCube &. |
| RSCV025 |
First select an InfoCube |
| RSCV026 |
The data dictionary could not be read for the InfoCube & |
| RSCV028 |
Checking InfoCube & with function &. |
| RSCV029 |
Checking & produced no errors or warnings. |
| RSCV030 |
Manual table maintenance (SE16) was switched on for & |
| RSCV040 |
Documentation for function module not available in language &1 |
| RSCV050 |
Time characteristic &1 cannot be derived |
| RSCV051 |
Time characteristic &1 is checked against time characteristic &2 |
| RSCV052 |
Start of check |
| RSCV053 |
Record with the DIMID &1 contains non-fitting time characteristics |
| RSCV054 |
Time characteristic &1 value &2 does not fit with time char &3 val &4 |
| RSCV055 |
End of check. &1 data records have errors |
| RSCV056 |
Consistency of time dimension of InfoCube &1 |
| RSCV057 |
InfoCube &1 has no time dimension, or FISCVARNT is missing |
| RSCV058 |
InfoCube &1 does not exist or is not active |
| RSCV059 |
The following checks were carried out: |
| RSCV060 |
InfoCube &1 was marked as a Cube with a consistent time dimension |
| RSCV061 |
InfoCube &1 was marked as a Cube with an inconsistent time dimension |
| RSCV062 |
Table &1 contains &2 data records with an incorrect partition column |
| RSCV063 |
Table &1 contains no records with an incorrect partitioning column |
| RSCV064 |
Test of partitioning column of InfoCube &1 |
| RSCV065 |
Aggregates were deactivated. You must reconstruct them |
| RSCV066 |
Aggregates could not be automatically deactivated |
| RSCV067 |
Correcting table &1 |
| RSCV068 |
Processing &1 different DIMIDs (dimension keys) |
| RSCV069 |
This DIMID is used by &1 records of the fact tables |
| RSCV070 |
This DIMID is no longer used in the fact table |
| RSCV071 |
Time dimension entries not being used are to be removed |
| RSCV072 |
Time dimension entries not being used were successfully removed |
| RSCV073 |
Error when removing entries not being used |
| RSCV074 |
Time dimension entries not being used removed from &1 |
| RSCV075 |
Error when reading metadata for InfoCube &1 |
| RSCV076 |
InfoCube &1 is not partitioned. Test not carried out |
| RSCV077 |
Metadata inconsistency in InfoCube &1. Test not carried out |
| RSCV078 |
InfoCube &1 does not contain a time dimension. Test not carried out |
| RSCV079 |
An SQL error occured in the data repair. Process not ended |
| RSCV080 |
Total of &1 records repaired in table &2 |
| RSCV081 |
Changes were committed |
| RSCV082 |
Consistency of time dimension of all InfoCubes |
| RSCV083 |
No master data found for characteristic of test described subsequently |
| RSCV084 |
Fiscal year period is too large |
| RSCV085 |
Error when deriving or determining fiscal year period |
| RSCV086 |
Correction not necessary for InfoCube &1 |
| RSCV087 |
The partitioning column for InfoCube &1 is repaired |
| RSCV088 |
The following table contains suggested corrections |
| RSCV089 |
Execute suggested repairs in the time dimension table |
| RSCV090 |
Errors occurred while changing dimension table. Changes rolled back |
| RSCV091 |
The modified records were successfully written into the table |
| RSCV092 |
Additional &1 data records contain errors |
| RSCV093 |
Data records with a different fiscal variant already exist |
| RSCV094 |
Data records exist for one fiscal variant only |
| RSCV095 |
Fiscal variant can be subsequently set to a fixed value |
| RSCV106 |
DATAFL for SID &1 in SID table &2 not set |
| RSCV107 |
Checking of dimension '&1' (&2) produced errors or warnings |
| RSCV108 |
No errors: Dimension '&1' characteristic '&2' |
| RSCV109 |
Checking dimension '&1' characteristic '&2' |
| RSCV110 |
Module RSDG_CUBE_CHECK established an error in InfoCube & |
| RSCV111 |
Type of incorrect InfoObject is '&'. |
| RSCV112 |
The error affects InfoObject '&' |
| RSCV113 |
Referenced InfoObject '&' is incorrect. |
| RSCV114 |
Dimension '&' is incorrect |
| RSCV115 |
Number of errors: & |
| RSCV116 |
Checking InfoCube & with & without errors and warnings. |
| RSCV117 |
Check of the database indices could not be generated |
| RSCV118 |
Database index & is of type & |
| RSCV119 |
A BITMAP index for index &, field &2 (cat. &3) improves response times |
| RSCV120 |
One or more SIDs for the InfoObject are incorrect |
| RSCV121 |
No errors in the SID table for InfoObject &. |
| RSCV122 |
SID table does not exist for InfoObject &. |
| RSCV123 |
Master data table & does not exist for InfoObject &. |
| RSCV124 |
Dimension table & does not have any entries for version & |
| RSCV125 |
Default entry SID=0 missing in SID table &, InfoObject & |
| RSCV126 |
More than one SID = 0 in entry in SID table &, InfoObject & |
| RSCV127 |
In row &4 of table &1, the value '&3' has the SIF = 0, InfoObject &2 |
| RSCV128 |
SID table & has no entries. |
| RSCV129 |
Master data table & has no entries for version &. |
| RSCV130 |
Entry &1 in SID table of char. &2 is missing in master data table &3 |
| RSCV131 |
Entry & in master data table does not have an SID. |
| RSCV132 |
SID=0 Entry &1 in &2 also contained in master data &3 of InfoObject &4. |
| RSCV133 |
Checking SID for InfoObject & InfoCube & tables: & and & |