| Q0201 |
Select an alternative |
| Q0202 |
Dependent control indicators will be canceled |
| Q0203 |
Check the indicator for the additive sample |
| Q0204 |
You selected "no recording"; processing is complete |
| Q0205 |
Calculated characteristic will be reset |
| Q0206 |
Incorrect cursor position |
| Q0207 |
Data was not changed |
| Q0208 |
You can only record classed values using both specification limits |
| Q0209 |
Set the indicator "Characteristic attribute" |
| Q0210 |
Check whether recording measured values is required |
| Q0211 |
Set the indicator "Measured values" |
| Q0212 |
You cannot valuate according to number of defects and selected sets |
| Q0213 |
The indicator for valuating according to number of defects will be reset |
| Q0214 |
The required characteristics must be documented in results recording |
| Q0215 |
Inspection scope "fixed" should be set for SPC charac. |
| Q0216 |
No print variant is set for the inspection type |
| Q0217 |
Batch classification for this char. is not possible in standard process |
| Q0250 |
Internal error in search help &1: Parameter &2 not recognized |
| Q0300 |
Your default values were used |
| Q0310 |
Only individual signatures are permitted |
| Q0311 |
Strategy &1 is a multilevel strategy, signature is not permitted |
| Q0312 |
Dependent data for the digital signature was deleted |
| Q0313 |
Some signature processes are still open, usage decision is not possible |
| Q0314 |
Text element &1 for digital signature in form &2 does not exist |
| Q0315 |
Error occurred when reading signature steps |
| Q0316 |
Error occurred when displaying signature steps |
| Q0317 |
Signature status does not allow any more signatures |
| Q0318 |
Status of inspection lot (UD made) does not allow any more signatures |
| Q0319 |
No entry exists in table TQ80_DS for notification type &1 and status &2 |
| Q0320 |
Save notification first so that a notification number can be assigned |
| Q0321 |
Digital signature was canceled, operation '&1' was not set |
| Q0322 |
Digital signature is still open, operation '&1' is not set |
| Q0323 |
Digital signature not started, operation '&1' is not set |
| Q0324 |
Digital signature finished, operation '&1' is set |
| Q0325 |
Continue digital signature process for operation '&1' |
| Q0326 |
Signature process completed successfully; Saving notification |
| Q0327 |
Signature process completed successfully; Continue operation '&1' |
| Q0328 |
Execute activity '&1' |
| Q0329 |
Digital signature prohibits the selection of more than one line |
| Q0330 |
Operation '&2' is not allowed for object category '&1' |
| Q0331 |
No signatures exist for the haeder of notification &1 |
| Q0332 |
No signatures exist for the action box for notification &1 |
| Q0333 |
No signatures exist for the measures for notification &1 |
| Q0334 |
No signature exists for notification &1 |
| Q0335 |
Operation '&2' is not supported for object category '&1' |
| Q0336 |
Signature category is not allowed to be initial |
| Q0337 |
Signature strategy is not allowed to be initial |
| Q0338 |
Notification type is not allowed to be initial |
| Q0339 |
Business operation is not allowed to be initial |
| Q0340 |
Table entry TQ80_DS for notifictn type &1 and status &2 is inconsistent |
| Q0400 |
Specification determination rule &1 does not exist |
| Q0401 |
No active implementation of BAdI &1 exists for rule &2 |
| Q0402 |
Cannot access documentation for object &1 |
| Q0403 |
Value &1 cannot be converted to a number |
| Q0404 |
Specification determination rule &1 could not be executed |
| Q0405 |
Specification determination rule &1 was started for characteristic &2 |
| Q0406 |
Spec. determination rule &1 only relevant for quant. characteristics |
| Q0407 |
Upper tolerance limit was changed from &1 to &2 |
| Q0408 |
Lower tolerance limit was changed from &1 to &2 |
| Q0409 |
Control indicator for upper or lower tolerance is initial |
| Q0410 |
Tolerance limits are not identical, rule is not executed |
| Q0411 |
Parameters result in: Lower spec. limit is greater than upper spec. limit |
| Q0412 |
Values for fields in specification determination rule pointless w/o rule |
| Q0413 |
Rule cannot be executed with initial tolerance limits |
| Q0414 |
Master insp. char. and tolerance key have different units of measurement |
| Q2001 |
Error 1: function call &1 in module &2 failed |
| Q2002 |
Error 2: &1 terminated |
| Q2003 |
Table does not exist in DDIC or in statistic tables |
| Q2004 |
Entry is inconsistent |
| Q2005 |
Setup parameters successfully saved |
| Q2006 |
Enter a value greater than &1 |
| Q2007 |
Enter a value greater than &1 |
| Q2008 |
Exception &1 in function &2 |
| Q2009 |
Operation started |
| Q2010 |
Operation terminated |
| Q2011 |
Check operation status using DBA operations monitor |
| Q2012 |
Table & does not exist in the ABAP Dictionary |
| Q2013 |
This special operation does not exist |
| Q2014 |
No tables were selected for reorganization |
| Q2015 |
You did not enter the tape name or device |
| Q2016 |
You must select at least one day |
| Q2020 |
Modifying parameter &1 for DB session is not meaningful |
| Q2021 |
Modifying parameters for DB system requires SYSTEM authorization |
| Q2022 |
Cannot modify parameter &1 online |
| Q2023 |
Error selecting historical values |
| Q2024 |
Date selected is in the future |
| Q2025 |
Error connecting to database |
| Q2026 |
Error executing command "ALTER SYSTEM ... SET ..." |
| Q2027 |
Unknown error occurred modifying parameter with "ALTER SYSTEM ...SET ..." |
| Q2028 |
DB parameter &1 invalid or outside validity range |
| Q2029 |
DB parameter &1 successfully changed - change is not permanent |
| Q2030 |
Connection name SYSTEMCON not maintained for user SYSTEM in DB &1 |
| Q2031 |
DB parameter &1 not changed |
| Q2032 |
DB parameter &1 changed (late modification and not permanent) |
| Q2033 |
First select column for text search |
| Q2034 |
Specify a character string for text search |
| Q2035 |
Character string "&1" not found |
| Q2036 |
First select column for sorting |
| Q2050 |
&1: Function call &2 failed, return code &3 |
| Q2100 |
Database system not supported for this function |