| CATSXT089 |
Column number must be at least & |
| CATSXT090 |
Saving disabled due to invalid column numbers in & |
| CATSXT091 |
Select a row |
| CATSXT092 |
Select one row only |
| CATSXT093 |
More than one subscreen was reserved for access & |
| CATSXT094 |
Choose a task component |
| CATSXT095 |
Different sender cost centers were derived for this task |
| CATSXT096 |
No data found in the selected period |
| CATSXT097 |
Internal error, restart the transaction (SAP Note 387175) |
| CATSXT098 |
Activity type is missing |
| CATSXT099 |
No target date selected -> data will not be copied |
| CATSXT100 |
Display incomplete due to missing authorizations |
| CATSXT101 |
System table TCATX_CC is not maintained |
| CATSXT102 |
Please release working time data with status '&1' |
| CATSXT103 |
Working time data with status '&1' is deleted |
| CATSXT104 |
Error "&1" while processing smart form &2 |
| CATSXT105 |
Component &1 is no longer valid on &2 and is therefore deleted |
| CATSXT106 |
Copying not possible due to change in entry rules |
| CATSXT107 |
Entry rules changed, check your entries |
| CATSXT108 |
Select a data record first |
| CATSXT109 |
Required action is not supported for data from CATS for Service Providers |
| CATSXT110 |
&1 data records ignored due to missing authorization |
| CATSXT111 |
Only possible to use a maximum of one cost center group in processing |
| CATSXT112 |
No suitable cost centers found for group &1 |
| CATSXT113 |
Action not possible; Table TCATSD (rejection reasons) not maintained |
| CATSXT114 |
No data found for approval |
| CATSXT115 |
Approval not possible for data with status &1 |
| CATSXT116 |
Rejection not possible for data with status &1 |
| CATSXT117 |
Work times / key figures were approved |
| CATSXT118 |
Work times / key figures were rejected |
| CATSXT119 |
The Travel Management application has not been installed in this system |
| CATSXT120 |
Action not possible - the trip must have the "To be Settled" status |
| CATSXT121 |
Action not possible - the trip must be new |
| CATSXT122 |
&1 was reset |
| CATSXT123 |
Action "&1" is not possible for status "&2" |
| CATSXT124 |
Interface of the smart form function module is not correct |
| CATSXT125 |
Data records with status 50 and 60 are not selected |
| CATSXT126 |
Data was deleted |
| CATSXT127 |
Data released for approval |
| CATSXT128 |
Data cannot be edited in statuses 50 or 60 |
| CATSXT129 |
Data was changed after program started -> status change not possible |
| CATSXT130 |
There is no data record with counter &1 |
| CATSXT131 |
Target status "&1" does not match status "&2" |
| CATSXT132 |
Status "&1" cannot be processed |
| CATSXT133 |
Profile missing for resetting rejection |
| CATSXT134 |
Change cancelled |
| CATSXT135 |
Action successfully completed |
| CATSXT136 |
Cost center group &1 contains more than 1000 cost centers |
| CATSXT137 |
&1 is not a valid e-mail address or SAP office distribution list |
| CATSXT138 |
Get variant &1 that was used last |
| CATSXT139 |
Variant &1 has been retrieved |
| CATSXT140 |
Data successfully transferred for personnel ID &1 |
| CATSXT141 |
&1 of &2 records transferred for pers. no. &3 - see previous message(s) |
| CATSXT142 |
A temporary key is missing from the transfer table |
| CATSXT143 |
The temporary key &1 is not unique |
| CATSXT144 |
Additions not possible - key (COUNTER) has already been set |
| CATSXT145 |
Chage/delete not possible - key (COUNTER) is missing |
| CATSXT146 |
Records for a task counter (TASKCOUNTER) must have the same date |
| CATSXT147 |
Task component &1 occurs more than once in task counter &2 |
| CATSXT148 |
There is more than one long text for task counter &1 |
| CATSXT149 |
Default is smaller than the minimum |
| CATSXT150 |
Negative minimal value is not allowed |
| CATSXT151 |
Clipboard closed by system - cannot close here |
| CATSXT152 |
Action is not possible in totals row -> Select another row |
| CATS_APPR_CUST000 |
Collective approval criteria not entered in correct sequence |
| CATS_APPR_CUST001 |
The data element you entered does not exist |
| CATS_APPR_CUST002 |
You have entered collective approval criteria more than once |
| CATS_APPR_CUST003 |
The collective approval criterion is not permitted |
| CATS_APPR_CUST004 |
There is no description for the specified field |
| CATS_APPR_CUST005 |
You cannot delete the approval view because it is still used |
| CATS_MA_TSHEET001 |
Last posting: &1 hours |
| CATS_MA_TSHEET002 |
Release &1 is not supported |
| CATS_MA_TSHEET003 |
Enter hours in the format hh.mm |
| CATS_MA_TSHEET004 |
Do not enter more than 99.99 hours |
| CATS_MA_TSHEET005 |
Enter a number of hours that is greater than 0.0 |
| CAVE001 |
Executed method & is not allowed |
| CAVE002 |
Only one document can be processed |
| CAVE003 |
No entry exists in the checklist for sales documents |
| CAVE004 |
Document &1 is not available in table &2 |
| CAVE005 |
Sourcing main item &1 (document &2) was not transferred |
| CAVE006 |
Item &1 (document &2) was changed after APO backorder processing |
| CAVE007 |
Delivery created meanwhile for item & (document &) |
| CAVE008 |
Item &1 (document &2) is not available in table &3 |
| CAVE009 |
No requirements could be changed for document &1 |
| CAVE010 |
No Time Zone Maintained/Active in Table TTZCU |
| CAVE011 |
Subitem of bill of material main item &1 (document &2) not changed |
| CAVE012 |
No back update for item &1 (document &2) |
| CAVE013 |
No back update for subitem for item &1 (document &2) |
| CAVE020 |
Material &1: Basis unit of measure in APO and in R/3 do not match |
| CAVE021 |
Order &1: Method &2 is not allowed |
| CAVE030 |
No sales area is assigned to sold-to party &1 and plant &2 |
| CAVE040 |
Function module &1 does not exist |
| CA_CHECK_DATE000 |
Invalid parameter transfer |
| CA_CHECK_DATE001 |
You are not authorized to execute program & |
| CA_CHECK_DATE002 |
No authorization for displaying data from this period |
| CA_CHECK_DATE003 |
Application indicator missing |
| CA_CHECK_DATE004 |
Date interval incomplete |
| CA_CHECK_DATE005 |
& & & & |
| CA_CHECK_DATE006 |
Error during creation of log |
| CA_TTE000 |
No errors occurred |