| C$406 |
No Help documentation available |
| C$407 |
Repeating group &1&2: Invalid logical operator &3 |
| C$408 |
No short text for symbol & |
| C$409 |
Symbol &&: nesting of special repeating groups is not supported |
| C$410 |
System error: Unknown symbol type & |
| C$411 |
Maximum recursion depth & for environment & has been exceeded |
| C$412 |
Environment & is not defined in this syntax |
| C$413 |
You cannot access environment & here |
| C$414 |
Repeating group && was ended without being open |
| C$415 |
Nesting error: System is exiting repeating group &&, but && is active |
| C$416 |
System error when accessing status stack |
| C$417 |
Symbol & is not defined |
| C$418 |
Shorten the symbol & to a maximum of 10 characters |
| C$419 |
No right parenthesis for symbol parameter & |
| C$420 |
Index & for symbol & is not numeric |
| C$421 |
Symbol &&: Environment & is not defined |
| C$422 |
Value assignment type & is not defined |
| C$423 |
Expansion category is not defined correctly |
| C$424 |
Value assignment type & is not defined |
| C$425 |
No parameters permitted when exiting repeating group && |
| C$426 |
No parameters permitted when accessing repeating group && |
| C$427 |
Recursion depth & for environment && is not numeric |
| C$428 |
Repeating group &&: User-defined text category & is not defined |
| C$429 |
Repeating group &&: Unknown sort sequence & |
| C$430 |
Repeating group &&& features unknown control command & |
| C$431 |
Repeating group &&: Could not identify parameter |
| C$432 |
Repeating group &&: Parameter & incorrect |
| C$433 |
Symbol &&: No right parenthesis |
| C$434 |
Repeating group &1&2: No logical operator |
| C$435 |
Repeating group &1&2: Error in parameter list |
| C$436 |
Symbol &: Indirection requires three parameters separated by commas |
| C$437 |
Symbol &: No expansion method specified |
| C$438 |
Symbol &: Cannot process processing mask & |
| C$439 |
Symbol &: Cannot process processing function & |
| C$440 |
Symbol &: Unknown expansion parameter & |
| C$441 |
Symbol &: No phrase identifier |
| C$442 |
Repeating group &&: No left parenthesis for parameter definition |
| C$443 |
Repeating group &&: No environment parameter |
| C$444 |
Nesting error: No end specified for repeating group && |
| C$445 |
Nesting error in repeating groups |
| C$446 |
Version number & is not defined |
| C$447 |
Symbol &: Bar code expansion needs two parameters |
| C$448 |
Symbol &: Invalid bar code type |
| C$449 |
Symbol &: Expansion method & is not defined |
| C$450 |
--------------------------- Import/Export ------------------------------ |
| C$451 |
Date of phr. lib. to be imported is identical to date of current library |
| C$452 |
Date of phr. lib. to be imported is older than date of current library |
| C$453 |
First use function "Check file" |
| C$454 |
Error during "Check file". Transfer impossible |
| C$455 |
Data provider &1 does not exist in address management |
| C$456 |
&1: &2 could not be inserted |
| C$457 |
Transfer file & does not exist |
| C$458 |
Could not start job. Error in procedure & (exception &) |
| C$459 |
&1: Phrase set assignment cannot be imported for phrase &2 |
| C$460 |
Phrase libraries have different dates |
| C$461 |
Phrase &1 for characteristic &2 cannot be converted in library &3 |
| C$462 |
Could not find specifications in transfer file |
| C$463 |
Cannot transfer all specifications directly |
| C$464 |
Could not open file & |
| C$465 |
&1: The object '&2' already exists |
| C$466 |
Error during check. Note the check log |
| C$467 |
Administration data of file does not match that of initial check |
| C$468 |
No identification or error during identification of phrase library |
| C$469 |
Could not find a correct phrase group |
| C$470 |
Could not find any correct phrases |
| C$471 |
Could not find any correct sources |
| C$472 |
Specification &1 not transferred due to error |
| C$473 |
Could not find any parameters |
| C$474 |
Error in initialization of export generator for object &1 |
| C$475 |
&1: field &2 in table &3 not available in system |
| C$476 |
&1: &2: Value longer than &3: "&4" |
| C$477 |
First call of program & |
| C$478 |
Rebooting program &1 after "&2" |
| C$479 |
Number of errors: & |
| C$480 |
&: Cannot find phrase set & |
| C$481 |
&1: Phrase &2 not found in phrase library &3 |
| C$482 |
&: Table/field &/& contains unpermitted value: "&" |
| C$483 |
&1: mandatory field &2 in table &3 does not exist |
| C$484 |
&1: Transfer terminated |
| C$485 |
&: Transaction & was undone and skipped |
| C$486 |
Transfer not possible: No authorization for insertion in & |
| C$487 |
&: Specification & is not to be transferred |
| C$488 |
&: Specification & is not unique in the system |
| C$489 |
&: Referenced specification & does not exist; it will be created |
| C$490 |
No transfer possible due to syntax errors |
| C$491 |
Conversion of user settings to "&1" and "&2" |
| C$492 |
Transfer reference & |
| C$493 |
&: Table/field &/& is contained twice in the transfer file |
| C$494 |
&1: Error for &2 (&3) |
| C$495 |
Enter &1 |
| C$496 |
Total number &1: &2 |
| C$497 |
Number of &1 created: &2 |
| C$498 |
Number of &1 updated: &2 |
| C$499 |
&1: Error when creating object in classification system (class &2) |
| C$500 |
Incorrect segment &2 in line &1 of transfer file, segment &3 expected |
| C$501 |
Line &: Incorrect delimiter & in transfer file |
| C$502 |
Line &: Key field & is missing |
| C$503 |
No entry & in communication table |
| C$504 |
File or path name of transfer file & too long |
| C$505 |
Change number and spec. deletion type & can only be used together |