| 5O666 |
Specify the basis for leave compensation |
| 5O667 |
Specify the legal severance pay basis for garnishment months |
| 5O668 |
Specify the pension severance pay basis for garnishment months |
| 5O700 |
7** Data transfer for the table-oriented organization model 700 - 750 |
| 5O701 |
Saved entries in table & : |
| 5O705 |
The update was cancelled; the system did not save any table entries |
| 5O706 |
Table entries already exist; data base update is not carried out |
| 5O707 |
Error during write access to table &1 |
| 5O801 |
Entry not possible: Retroactive accntng must be at least possible for & |
| 5P0 |
000 to 999 Area reserved for error messages for cycle check |
| 5P000 |
Rule O.K. |
| 5P001 |
Asterisk entry (others fall) missing in variable key |
| 5P002 |
Detailed definition missing, variable key must have following layout: & |
| 5P003 |
Repeated access of line using operation NEXTR or * |
| 5P004 |
Parametrization of operation does not match syntax |
| 5P005 |
Value or parameter value is not numeric |
| 5P006 |
Operation does not exist |
| 5P007 |
There is an invalid sequential number for operation NEXTR |
| 5P008 |
There is no entry with the sequential number determined by NEXTR or * |
| 5P009 |
New seq. no. is not included in the set of values: '9' is the last number |
| 5P010 |
Layout of the table key is incorrect, the following is required: & |
| 5P011 |
Line is not accessed, mark as a comment or delete |
| 5P012 |
There are several entries with the same key |
| 5P013 |
Attributes have not been maintained |
| 5P014 |
Operation has not been entered in table 52A0 |
| 5P015 |
Only the operation * exists |
| 5P016 |
Type of operation is different from rule type |
| 5P017 |
No operations occur that are compatible with the rule type |
| 5P018 |
Offset or length entry exceeds the field length |
| 5P019 |
Masking of a parameter is incorrect |
| 5P020 |
Several decision operations are not allowed |
| 5P021 |
The operations NEXTR or * are not allowed for this rule type |
| 5P022 |
The value or parameter value is not alphanumeric |
| 5P023 |
Only the characters < = > are allowed |
| 5P024 |
Only the characters Y N are allowed |
| 5P025 |
Invalid characters in the parameter values - refer to operation docu |
| 5P026 |
Insufficient space for detailed definition of the variable key |
| 5P027 |
Error in variable key |
| 5P028 |
The operation is no longer valid - please use operation & |
| 5P029 |
Parameter value not included in permitted set of values |
| 5P030 |
Renumber the rule or generate the check program |
| 5P031 |
No further operations may come after this operation |
| 5P032 |
Entry for country grouping missing in table T500L |
| 5P033 |
Repeated accessing or calling of a rule |
| 5P034 |
Rule does not exist or is not allowed |
| 5P035 |
Only the characters + - are allowed |
| 5P036 |
Only the characters R I are allowed |
| 5P037 |
Only the characters X ' ' are allowed (' ' not possible in variable key) |
| 5P038 |
Special coding desired but does not exist for the check in T52BO |
| 5P039 |
No entry in T52BO for these parameters of the operation |
| 5P040 |
Incorrect parametrization of the operation (space check) |
| 5P041 |
The specified time type is not in table T555A |
| 5P042 |
The specified daily work schedule is not in table T550A |
| 5P043 |
The check for this operation does not exist |
| 5P050 |
Error in calculation rule structure |
| 5P200 |
&: O.K. |
| 5P201 |
&: Transfer from the standard client |
| 5P202 |
&: More specific definition required for variable key: & |
| 5P203 |
&: No valid ABAP prefix has been specified for the BREAK operation |
| 5P204 |
&: No valid user name has been specified for the BREAK operation |
| 5P205 |
&: Only the rule type 'D' or '*' is allowed |
| 5P206 |
&: Repeated line access possible via operation NEXTR |
| 5P207 |
&: Inverted comma is missing at end of comparison value |
| 5P208 |
&: Blank character is missing after NEXTR, BREAK, or decision operation |
| 5P209 |
&: Field definition and value are not compatible |
| 5P210 |
&: Offset specification is missing or is not numeric |
| 5P211 |
&: Length specification for decision op. missing, not numeric, or zero |
| 5P212 |
&: Length specification is too long or does not end with a bracket |
| 5P213 |
&: Operation does not exist or has been misspelled |
| 5P214 |
&: The '=' sign is missing after FLDID or feature operation |
| 5P215 |
&: The comma is missing at the end of the BREAK or feature operation |
| 5P216 |
&: The operation NEXTR has an invalid sequence number |
| 5P217 |
&: No line exists with the sequence number determined by NEXTR |
| 5P218 |
&: Sequence no. is not within the set of values: '9' is the last number |
| 5P219 |
&: Field name is not allowed or is missing |
| 5P220 |
&: Offset and/or length specification exceeds the field length |
| 5P221 |
&: Use packed fields for comparison only: & |
| 5P222 |
&: Layout incorrect, mark or delete organization of var. key: & |
| 5P223 |
&: Line cannot be accessed, mark as comment or delete |
| 5P224 |
&: Function exit incorrectly defined. Define as &xxxxx(rrrrrrrr) |
| 5P225 |
&: No report & for function exit |
| 5P226 |
&: Feature is not correct, see check in tree maintenance |
| 5P230 |
&: There are several entries with the same key |
| 5P250 |
&: Subfeature & has not been marked as such |
| 5P251 |
&: A decision tree does not as yet exist for feature & |
| 5P252 |
&: Assignment to feature & is not allowed |
| 5P253 |
&: Operation ERROR for key & in & is not allowed |
| 5P254 |
&: A feature is called several times for feature & |
| 5P255 |
&: The subfeature & specified via FLDID does not exist |
| 5P256 |
&: Field name & in feature & does not exist in DDIC |
| 5P257 |
&: Feature & has only been saved |
| 5P258 |
&: Assignment is missing for key & in & |
| 5P259 |
&: Multiple assignment for key & in & |
| 5P260 |
&: Field name & in & is not used in main feature & |
| 5P261 |
&: Assignment for key & in & is invalid |
| 5P262 |
&: Feature & has no space for addt'l key characters |
| 5P270 |
&: End of number range reached for feature generation |
| 5P271 |
&: Number range for feature generation has not been created |
| 5P272 |
&: Number range no. 01 does not exist |
| 5P273 |
&: Number range has not been created for internal number assignment |